fix(files): review round 2, the server — locks the GC and folders read under, the mount check, the old mount name

- GC: the expiry warning marks each file conditionally on the expiry it saw, one commit each (a file
  deleted meanwhile no longer fails the run; one re-timed keeps its fresh expiry unwarned); eviction
  counts the disk again when a candidate was freed meanwhile, so it never evicts for space already free.
- Folders: a retention change locks the folder and its files, and a finishing file reads the retention
  under a share lock, so neither misses the other; a folder delete locks the files it takes home (a
  file moved out meanwhile stays put, one deleted meanwhile no longer fails the delete).
- Upload: the folder is checked before the probe and held only once the job names it.
- Dedup enqueue locks the cached asset, so a release meanwhile yields a fresh one instead of a 500.
- Mount check reads the kernel's mount table instead of comparing devices (the vfs storage driver gave
  a mounted volume the device of /), and only inside a container; the API also logs a fresh, empty
  volume in the library's place.
- Compose files fall back to DOWNLOAD_HOST_PATH; the upgrade notes cover the from-source pull.
- Folder routes call owned_or_404 directly.
This commit is contained in:
2026-10-13 02:32:49 +02:00
parent 8b2260c9a8
commit 54a6bbf07f
15 changed files with 543 additions and 93 deletions
+33 -3
View File
@@ -136,7 +136,14 @@ def done_expiry(db: Session, folder_id: int | None, kept: bool) -> datetime | No
folder that keeps files)."""
if kept or folder_id is None:
return None
days = db.execute(select(FileFolder.retention_days).where(FileFolder.id == folder_id)).scalar()
# Read under a share lock, held to the caller's commit: a retention change (`set_retention` locks
# the folder) waits for this file and restamps it too, or this read waits for the change and
# takes the new value — never the old value stamped on a file the change did not see.
days = db.execute(
select(FileFolder.retention_days)
.where(FileFolder.id == folder_id)
.with_for_update(read=True)
).scalar()
return None if days is None else datetime.now(timezone.utc) + timedelta(days=days)
@@ -208,18 +215,30 @@ def set_retention(db: Session, folder: FileFolder, days: int | None) -> None:
"""Change how long `folder` keeps a file (None = until deleted). The done files already in it
move by the difference — each keeps the age it has — but none ends up closer than the GC's
warning window, so a shortened retention still warns before it takes anything."""
# Wait out a file being put in it or stamped from it right now (`own_folder`, `done_expiry`), so
# that file is among the ones restamped below. Re-read: another change may have landed first.
db.execute(
select(FileFolder)
.where(FileFolder.id == folder.id)
.with_for_update()
.execution_options(populate_existing=True)
)
old = folder.retention_days
if old == days:
return
folder.retention_days = days
now = datetime.now(timezone.utc)
floor = now + timedelta(days=sysconfig.get_int(db, "download_gc_grace_days"))
# Locked as they are read: one moved out or deleted meanwhile is no longer this folder's to time.
jobs = db.execute(
select(DownloadJob).where(
select(DownloadJob)
.where(
DownloadJob.folder_id == folder.id,
DownloadJob.status == JobStatus.DONE,
DownloadJob.kept.is_(False),
)
.with_for_update()
.execution_options(populate_existing=True)
).scalars()
for job in jobs:
if days is None:
@@ -238,7 +257,18 @@ def delete_own(db: Session, folder: FileFolder) -> int:
raise FolderError("file_folder_not_own")
# Wait out a file being put in it right now (`own_folder`), then take that one home too.
db.execute(select(FileFolder.id).where(FileFolder.id == folder.id).with_for_update())
jobs = db.execute(select(DownloadJob).where(DownloadJob.folder_id == folder.id)).scalars().all()
# Locked as they are read: a file moved out meanwhile stays where it went, and one deleted
# meanwhile is not written back (its gone row would fail the delete).
jobs = (
db.execute(
select(DownloadJob)
.where(DownloadJob.folder_id == folder.id)
.with_for_update()
.execution_options(populate_existing=True)
)
.scalars()
.all()
)
for job in jobs:
job.folder_id = source_folder(db, job.user_id, source_key_for(db, job)).id
restamp(db, job)
+86 -49
View File
@@ -22,7 +22,7 @@ import time
from datetime import datetime, timedelta, timezone
from pathlib import Path
from sqlalchemy import func, or_, select
from sqlalchemy import func, or_, select, update
from sqlalchemy.orm import Session
from app import logs, sysconfig
@@ -82,6 +82,59 @@ def _relock_expired(
return job if still else None
def _mark_warned(db: Session, job_id: int, expires_at: datetime) -> DownloadJob | None:
"""Mark one file warned if it still goes when the pass saw it go — not deleted, kept, moved or
re-timed since (each of those sets a fresh expiry, and its own warning to come) — and return it.
The UPDATE's row lock holds it so until the commit."""
hit = db.execute(
update(DownloadJob)
.where(
DownloadJob.id == job_id,
DownloadJob.status == JobStatus.DONE,
DownloadJob.kept.is_(False),
DownloadJob.expiry_warned.is_(False),
DownloadJob.expires_at == expires_at,
)
.values(expiry_warned=True)
.returning(DownloadJob.id)
.execution_options(synchronize_session=False)
).scalar_one_or_none()
return db.get(DownloadJob, job_id) if hit is not None else None
def _on_disk(db: Session) -> int:
"""The bytes the cache holds now (every asset whose file is on disk)."""
return (
db.execute(
select(func.coalesce(func.sum(MediaAsset.size_bytes), 0)).where(quota.ON_DISK)
).scalar()
or 0
)
def _relock_evictable(db: Session, asset_id: int) -> tuple[MediaAsset | None, list[DownloadJob]]:
"""Re-read an eviction candidate and its holders under their locks (the asset, then its jobs —
the order the user routes take): between the pass's SELECT and here a holder may have kept it,
or every holder deleted it."""
asset = db.execute(
select(MediaAsset)
.where(MediaAsset.id == asset_id)
.with_for_update()
.execution_options(populate_existing=True)
).scalar_one_or_none()
holders = (
db.execute(
select(DownloadJob)
.where(DownloadJob.asset_id == asset_id)
.with_for_update()
.execution_options(populate_existing=True)
)
.scalars()
.all()
)
return asset, list(holders)
def _drop_job(db: Session, job: DownloadJob, ntype: str) -> None:
"""Take a file out of its user's library: tell them, release the job's hold on the asset (the
file goes with the last holder), delete the row (its shares and links cascade)."""
@@ -176,29 +229,28 @@ def run_download_gc(db: Session) -> dict:
grace_days = sysconfig.get_int(db, "download_gc_grace_days")
warned = expired = evicted = reaped = 0
# 1. Pre-expiry warnings — one per file, the first run inside the grace window.
# 1. Pre-expiry warnings — one per file, the first run inside the grace window. Each mark is
# conditional on the expiry the SELECT saw and committed on its own: a file deleted since is
# passed over (a write to its gone row would fail the whole run), and one kept, moved or re-timed
# since keeps its fresh expiry unwarned.
warn_before = now + timedelta(days=grace_days)
soon = (
db.execute(
select(DownloadJob).where(
DownloadJob.status == JobStatus.DONE,
DownloadJob.kept.is_(False),
DownloadJob.expiry_warned.is_(False),
DownloadJob.expires_at.is_not(None),
DownloadJob.expires_at > now,
DownloadJob.expires_at <= warn_before,
)
soon = db.execute(
select(DownloadJob.id, DownloadJob.expires_at).where(
DownloadJob.status == JobStatus.DONE,
DownloadJob.kept.is_(False),
DownloadJob.expiry_warned.is_(False),
DownloadJob.expires_at.is_not(None),
DownloadJob.expires_at > now,
DownloadJob.expires_at <= warn_before,
)
.scalars()
.all()
)
for job in soon:
_notify(
db, job, db.get(MediaAsset, job.asset_id) if job.asset_id else None, "download_expiring"
)
job.expiry_warned = True
warned += 1
if soon:
).all()
db.rollback() # the pass-1 snapshot holds no locks; each mark takes its own below
for job_id, expires_at in soon:
job = _mark_warned(db, job_id, expires_at)
if job is not None:
asset = db.get(MediaAsset, job.asset_id) if job.asset_id else None
_notify(db, job, asset, "download_expiring")
warned += 1
db.commit()
# 2. Expiry — a file past its folder's retention leaves the library (warned in pass 1).
@@ -224,19 +276,14 @@ def run_download_gc(db: Session) -> dict:
# fetch again) and never a file anyone kept; an evicted file leaves every holder's library.
cap = sysconfig.get_int(db, "download_total_max_bytes")
if cap > 0:
total = (
db.execute(
select(func.coalesce(func.sum(MediaAsset.size_bytes), 0)).where(quota.ON_DISK)
).scalar()
or 0
)
total = _on_disk(db)
if total > cap:
kept_assets = select(DownloadJob.asset_id).where(
DownloadJob.kept.is_(True), DownloadJob.asset_id.is_not(None)
)
candidates = (
candidate_ids = (
db.execute(
select(MediaAsset)
select(MediaAsset.id)
.where(
MediaAsset.status == "ready",
MediaAsset.source_kind != "upload",
@@ -247,30 +294,20 @@ def run_download_gc(db: Session) -> dict:
.scalars()
.all()
)
candidate_ids = [a.id for a in candidates]
db.rollback()
for asset_id in candidate_ids:
if total <= cap:
break
# Locked and re-read like an expiry: a holder may have kept it, or every holder
# deleted it (the file is then already gone and counted out) since the SELECT.
asset = db.execute(
select(MediaAsset)
.where(MediaAsset.id == asset_id)
.with_for_update()
.execution_options(populate_existing=True)
).scalar_one_or_none()
holders = (
db.execute(
select(DownloadJob)
.where(DownloadJob.asset_id == asset_id)
.with_for_update()
.execution_options(populate_existing=True)
)
.scalars()
.all()
)
if asset is None or asset.status != "ready" or any(j.kept for j in holders):
# deleted it since the SELECT.
asset, holders = _relock_evictable(db, asset_id)
if asset is None or asset.status != "ready":
# Its file went (or is being fetched afresh) since the sum: the disk is counted
# again, or the pass would evict another user's file for space already free.
db.commit()
total = _on_disk(db)
continue
if any(j.kept for j in holders):
db.commit()
continue
total -= asset.size_bytes or 0
+23 -1
View File
@@ -65,6 +65,23 @@ def reference_url(job, asset) -> str | None:
return None
def library_left_behind(db: Session, files_root: str) -> bool:
"""True when the library names files and none of the newest of them is under `files_root` — a
fresh, empty volume mounted in the library's place (a compose file changed under an install, its
old volume left behind). The mount check cannot see that: the new volume is a real mount."""
rels = (
db.execute(
select(MediaAsset.rel_path)
.where(MediaAsset.status == "ready", MediaAsset.rel_path.is_not(None))
.order_by(MediaAsset.id.desc())
.limit(20)
)
.scalars()
.all()
)
return bool(rels) and not any(storage.abs_path(files_root, r).exists() for r in rels if r)
def get_or_create_asset(
db: Session, source_kind: str, source_ref: str, format_sig: str
) -> MediaAsset:
@@ -77,7 +94,12 @@ def get_or_create_asset(
MediaAsset.source_ref == source_ref,
MediaAsset.format_sig == format_sig,
)
asset = db.execute(stmt).scalar_one_or_none()
# Locked to the caller's commit: a release or the GC freeing this asset meanwhile (they lock it
# too) either waits for the new hold, or has deleted the row by the time this read returns — and
# the caller then gets a fresh one, never a job pointing at a row that is gone.
asset = db.execute(
stmt.with_for_update().execution_options(populate_existing=True)
).scalar_one_or_none()
if asset is not None:
# A previously-FAILED shared asset must be re-attempted for the new job about to hold it —
# reset it to pending (+clear the error) so the worker actually re-downloads instead of
+43 -11
View File
@@ -68,20 +68,52 @@ _FOLD_MAP = str.maketrans(
)
def files_root_problem(root: str, system_root: str = "/") -> str | None:
"""Why `root` cannot be the files library's volume, or None when it can. A root that sits on the
container's own filesystem is the image's empty directory, not a mounted volume: the library
would answer 404 for every file, and what a download writes would go when the container does —
the state an install is in when its compose file still mounts the library somewhere else."""
def _mount_points(mountinfo: str) -> list[str]:
"""The mount points a /proc/<pid>/mountinfo table lists (its fifth field, octal escapes undone)."""
points = []
for line in mountinfo.splitlines():
fields = line.split(" ")
if len(fields) > 4:
points.append(re.sub(r"\\([0-7]{3})", lambda m: chr(int(m.group(1), 8)), fields[4]))
return points
def _in_container() -> bool:
return Path("/.dockerenv").exists() or Path("/run/.containerenv").exists()
def _read_mountinfo() -> str | None:
try:
return Path("/proc/self/mountinfo").read_text()
# silent-ok: no mount table to read (not Linux) — the caller then cannot tell, and refuses nothing.
except OSError:
return None
def files_root_problem(
root: str, mountinfo: str | None = None, in_container: bool | None = None
) -> str | None:
"""Why `root` cannot be the files library's volume, or None when it can. In a container, a root
that is no mount of its own (nor inside one) is the image's empty directory: the library would
answer 404 for every file, and what a download writes would go when the container does — the
state an install is in when its compose file still mounts the library somewhere else.
Asked of the kernel's mount table, not by comparing devices: a storage driver that keeps the
container's root on the host's own disk (vfs, the fallback under Docker-in-LXC on older ZFS) gives
a mounted volume the same device as `/`. Outside a container a plain directory is a fine root."""
path = Path(root)
if not path.is_dir():
return f"{root} does not exist"
try:
if path.stat().st_dev == Path(system_root).stat().st_dev:
return f"{root} is not a mounted volume (it is the container's own empty directory)"
# silent-ok: the failure IS the answer — returned as the reason, which the caller logs.
except OSError as e:
return f"{root} cannot be read ({e})"
if in_container if in_container is not None else _in_container():
table = mountinfo if mountinfo is not None else _read_mountinfo()
if table is not None:
real = os.path.realpath(root)
mounted = any(
m != "/" and (real == m or real.startswith(m.rstrip("/") + "/"))
for m in _mount_points(table)
)
if not mounted:
return f"{root} is not a mounted volume (it is the container's own empty directory)"
if not os.access(path, os.W_OK):
return f"{root} is not writable"
return None
+4 -2
View File
@@ -70,7 +70,9 @@ def ingest_upload(
rejected upload leaves nothing behind and the caller just cleans up its temp file."""
quota.check_upload(db, user_id, size) # the file's size is known → charge it up front
if folder_id is not None:
folders.upload_target(db, user_id, folder_id)
# Refused before any work; held only once the job is about to name it (below), not through
# the probe and the poster, which a rename or delete of the folder would wait out.
folders.upload_target(db, user_id, folder_id, hold=False)
data = probe.probe_json(src_path)
vcodec, acodec, width, height, duration = probe.facts(data)
@@ -138,7 +140,7 @@ def ingest_upload(
db.add(job)
folders.place(db, job)
if folder_id is not None:
job.folder_id = folder_id
job.folder_id = folders.upload_target(db, user_id, folder_id).id
if not convert:
folders.stamp_done(db, job)
service.incr_ref_count(db, asset.id)
+13
View File
@@ -28,6 +28,7 @@ log = logs.get_logger(__name__)
from app import bodylimit, collation, logsink, state, sysconfig # noqa: E402 — logging is configured first
from app.config import settings # noqa: E402 — logging is configured first
from app.db import SessionLocal, engine # noqa: E402 — logging is configured first
from app.downloads import service as download_service # noqa: E402 — logging is configured first
from app.downloads import storage # noqa: E402 — logging is configured first
from app.plex import stream as plex_stream # noqa: E402 — logging is configured first
from app.plex import subtitles as plex_subtitles # noqa: E402 — logging is configured first
@@ -84,6 +85,18 @@ async def lifespan(app: FastAPI):
# With the traceback: this catch spans a connection, a query and a coercion at boot,
# and `%s` of the exception does not say which of them raised.
log.exception("could not read the stored log level; staying at %s", current_level())
if not problem:
try:
left = download_service.library_left_behind(db, settings.files_root)
except Exception: # a database not reachable yet: the check is a hint, never a gate
log.exception("could not check the files library against its database")
else:
if left:
log.critical(
"The files library is empty but the database names files: the volume "
"mounted at %s is not the one that holds them. See docs/self-hosting.md.",
settings.files_root,
)
if not state.is_configured(db):
token = state.rotate_setup_token(db)
url = f"{settings.app_base}/setup?token={token}"
+2 -6
View File
@@ -339,10 +339,6 @@ def _serialize_folder(folder: FileFolder, count: int, size: int) -> dict:
}
def _own_folder_or_404(db: Session, user: User, folder_id: int) -> FileFolder:
return owned_or_404(db, FileFolder, folder_id, user, what="folder")
@router.get("/folders")
def list_folders(user: User = Depends(current_user), db: Session = Depends(get_db)) -> list[dict]:
"""The caller's folders with how many files each holds and their size. A source folder its
@@ -407,7 +403,7 @@ def update_folder(
) -> dict:
"""Rename one of the caller's own folders (a source folder's name is its origin's), and/or set
how long any of their folders keeps a file (`folders.set_retention`)."""
folder = _own_folder_or_404(db, user, folder_id)
folder = owned_or_404(db, FileFolder, folder_id, user, what="folder")
sent = body.model_fields_set
if "name" in sent:
if folder.kind != folders.FolderKind.OWN:
@@ -457,7 +453,7 @@ def delete_folder(
folder_id: int, user: User = Depends(current_user), db: Session = Depends(get_db)
) -> dict:
"""Delete one of the caller's own folders; its files go back to their source folders."""
folder = _own_folder_or_404(db, user, folder_id)
folder = owned_or_404(db, FileFolder, folder_id, user, what="folder")
try:
moved = folders.delete_own(db, folder)
except folders.FolderError as e:
+239 -8
View File
@@ -308,21 +308,22 @@ def test_one_users_expiry_leaves_another_users_copy(db, make_user, _root):
assert (_root / "a.mp4").exists()
def _meanwhile(monkeypatch, act):
"""Run `act` in another session (another request) between the GC's expiry SELECT and its
handling of each file it found — the window a user's click can land in."""
real = gcmod._relock_expired
def _meanwhile(monkeypatch, act, step="_relock_expired"):
"""Run `act` in another session (another request) between a GC pass's SELECT and its handling of
each row it found — the window a user's click can land in. `step` is the pass's per-row re-read
(expiry, warning, eviction); `act` gets that row's id."""
real = getattr(gcmod, step)
def relock(db, job_id, asset_id, now):
def wrapped(db, key, *rest):
other = SessionLocal()
try:
act(other, job_id)
act(other, key)
other.commit()
finally:
other.close()
return real(db, job_id, asset_id, now)
return real(db, key, *rest)
monkeypatch.setattr(gcmod, "_relock_expired", relock)
monkeypatch.setattr(gcmod, step, wrapped)
def test_a_file_kept_while_the_gc_runs_stays(db, make_user, _root, monkeypatch):
@@ -376,6 +377,236 @@ def test_the_cache_cap_never_evicts_a_kept_file_and_an_evicted_one_leaves_every_
assert (_root / "old.mp4").exists() and not (_root / "new.mp4").exists()
def test_a_file_deleted_while_the_gc_warns_does_not_stop_the_run(db, make_user, _root, monkeypatch):
# Written back from a stale read, the warning of a deleted file failed the whole run: nothing
# expired or was evicted that cycle, nor the next while the race lasted.
(_root / "a.mp4").write_bytes(b"x")
(_root / "b.mp4").write_bytes(b"x")
uid = make_user().id
_job(db, uid, _asset(db), expires_at=NOW + timedelta(hours=1))
gone = _job(
db, uid, _asset(db, ref="bbbbbbbbbbb", rel="b.mp4"), expires_at=NOW - timedelta(minutes=1)
)
def user_deletes(other, jid):
service.delete(other, other.get(DownloadJob, jid))
_meanwhile(monkeypatch, user_deletes, step="_mark_warned")
result = _gc(db)
assert (result["warned"], result["expired"]) == (0, 1)
db.expire_all()
assert db.get(DownloadJob, gone.id) is None
assert _notices(db, uid, "download_expiring") == 0
def test_a_file_re_timed_while_the_gc_warns_keeps_its_new_expiry_unwarned(
db, make_user, _root, monkeypatch
):
# Moved, un-kept or its folder's retention changed: a fresh expiry, warned when it comes — not
# marked warned now for a date it no longer has.
uid = make_user().id
job = _job(db, uid, _asset(db), expires_at=NOW + timedelta(hours=1))
later = NOW + timedelta(days=30)
def re_timed(other, jid):
moved = other.get(DownloadJob, jid)
moved.expires_at = later
moved.expiry_warned = False
_meanwhile(monkeypatch, re_timed, step="_mark_warned")
assert _gc(db)["warned"] == 0
db.expire_all()
fresh = db.get(DownloadJob, job.id)
assert (fresh.expires_at, fresh.expiry_warned) == (later, False)
assert _notices(db, uid, "download_expiring") == 0
def _two_over_the_cap(db, make_user, _root):
sysconfig.set_value(db, "download_total_max_bytes", 15)
db.commit()
a, b = make_user().id, make_user().id
for name in ("old.mp4", "new.mp4"):
(_root / name).write_bytes(b"x")
old = _asset(db, ref="oldoldoldol", rel="old.mp4", size=10)
new = _asset(db, ref="newnewnewne", rel="new.mp4", size=10)
old.last_access_at = NOW - timedelta(days=9)
new.last_access_at = NOW - timedelta(days=1)
return _job(db, a, old), _job(db, b, new)
def test_a_file_deleted_while_the_cache_is_over_its_cap_frees_that_space_and_no_more(
db, make_user, _root, monkeypatch
):
# Its bytes still counted, the pass went on to evict another user's file for space already free.
jold, jnew = _two_over_the_cap(db, make_user, _root)
def holder_deletes(other, asset_id):
if asset_id == jold.asset_id:
service.delete(other, other.get(DownloadJob, jold.id))
_meanwhile(monkeypatch, holder_deletes, step="_relock_evictable")
assert _gc(db)["evicted"] == 0
db.expire_all()
assert db.get(DownloadJob, jnew.id) is not None
assert (_root / "new.mp4").exists()
def test_a_file_kept_while_the_cache_is_over_its_cap_stays(db, make_user, _root, monkeypatch):
jold, jnew = _two_over_the_cap(db, make_user, _root)
def holder_keeps(other, asset_id):
if asset_id == jold.asset_id:
other.get(DownloadJob, jold.id).kept = True
_meanwhile(monkeypatch, holder_keeps, step="_relock_evictable")
assert _gc(db)["evicted"] == 1 # the newer one goes in its place
db.expire_all()
assert db.get(DownloadJob, jold.id) is not None
assert (_root / "old.mp4").exists()
assert db.get(DownloadJob, jnew.id) is None
def _in_thread(work):
"""Run `work(other_session)` in another thread and session; returns (thread, outcome list)."""
import threading
outcome: list[object] = []
def run():
other = SessionLocal()
try:
outcome.append(work(other))
other.commit()
except Exception as e: # noqa: BLE001 — the assertion below names what went wrong
outcome.append(e)
finally:
other.close()
t = threading.Thread(target=run)
t.start()
return t, outcome
def test_a_retention_changed_while_a_file_goes_in_times_that_file_too(db, make_user):
# The change used to list the folder's files before the arriving one was in, so that one kept the
# old retention — deleted later from a folder now set to keep files forever.
uid = make_user().id
own = FileFolder(user_id=uid, kind=folders.FolderKind.OWN, name="Mine", retention_days=7)
db.add(own)
db.commit()
own_id = own.id
job = _job(db, uid, _asset(db))
target = folders.own_folder(db, uid, own_id) # held from the check until this commits
t, outcome = _in_thread(
lambda other: folders.set_retention(other, other.get(FileFolder, own_id), None)
)
t.join(timeout=1)
folders.move(db, job, target) # stamped with the 7 days it sees
db.commit()
t.join(timeout=10)
assert outcome == [None]
db.expire_all()
assert db.get(DownloadJob, job.id).expires_at is None
def test_a_retention_changed_while_a_file_finishes_there_times_that_file_too(db, make_user):
# The worker's finish read the folder's old retention unlocked, while the change listed the done
# files before this one was among them.
uid = make_user().id
own = FileFolder(user_id=uid, kind=folders.FolderKind.OWN, name="Mine", retention_days=7)
db.add(own)
db.commit()
own_id = own.id
job = _job(db, uid, _asset(db), status=JobStatus.RUNNING)
folders.move(db, job, own)
db.commit()
job.status = JobStatus.DONE
folders.stamp_done(db, job) # the finish: stamped with the 7 days it reads
db.flush()
t, outcome = _in_thread(
lambda other: folders.set_retention(other, other.get(FileFolder, own_id), None)
)
t.join(timeout=1)
db.commit()
t.join(timeout=10)
assert outcome == [None]
db.expire_all()
assert db.get(DownloadJob, job.id).expires_at is None
def test_a_file_moved_out_while_its_folder_is_deleted_stays_where_it_went(db, make_user):
uid = make_user().id
f = FileFolder(user_id=uid, kind=folders.FolderKind.OWN, name="F")
g = FileFolder(user_id=uid, kind=folders.FolderKind.OWN, name="G")
db.add_all([f, g])
db.commit()
f_id, g_id = f.id, g.id
job = _job(db, uid, _asset(db))
folders.move(db, job, f)
db.commit()
folders.move(db, job, folders.own_folder(db, uid, g_id))
db.flush() # the move is written, not yet committed
t, outcome = _in_thread(lambda other: folders.delete_own(other, other.get(FileFolder, f_id)))
t.join(timeout=1)
assert t.is_alive() # the delete waits for the file it would take home
db.commit()
t.join(timeout=10)
assert outcome == [0]
db.expire_all()
assert db.get(DownloadJob, job.id).folder_id == g_id
def test_a_file_deleted_while_its_folder_is_deleted_does_not_fail_the_delete(db, make_user, _root):
(_root / "a.mp4").write_bytes(b"x")
uid = make_user().id
f = FileFolder(user_id=uid, kind=folders.FolderKind.OWN, name="F")
db.add(f)
db.commit()
f_id = f.id
job = _job(db, uid, _asset(db))
folders.move(db, job, f)
db.commit()
service.delete(db, db.get(DownloadJob, job.id))
db.flush() # deleted, not yet committed
t, outcome = _in_thread(lambda other: folders.delete_own(other, other.get(FileFolder, f_id)))
t.join(timeout=1)
db.commit()
t.join(timeout=10)
assert outcome == [0]
db.expire_all()
assert db.get(FileFolder, f_id) is None
def test_a_file_asked_for_while_its_cached_copy_is_freed_gets_a_fresh_one(db, make_user):
# The enqueue read the cached copy unlocked: freed meanwhile, its job pointed at a row that was gone
# (a foreign-key failure, a 500).
asset = _asset(db)
asset_id, sig = asset.id, asset.format_sig
db.commit()
db.execute(select(MediaAsset).where(MediaAsset.id == asset_id).with_for_update())
db.delete(db.get(MediaAsset, asset_id))
db.flush() # the release, not yet committed
t, outcome = _in_thread(
lambda other: service.get_or_create_asset(other, "youtube", "abcdefghijk", sig).id
)
t.join(timeout=1)
assert t.is_alive() # it waits for the release
db.commit()
t.join(timeout=10)
[fresh] = outcome
assert isinstance(fresh, int) and fresh != asset_id
def test_an_empty_volume_in_the_librarys_place_is_noticed(db, make_user, _root):
# A fresh volume is a real, writable mount: only the files the library names tell it is the wrong one.
assert service.library_left_behind(db, str(_root)) is False # nothing named yet
_asset(db, rel="a.mp4")
db.commit()
assert service.library_left_behind(db, str(_root)) is True
(_root / "a.mp4").write_bytes(b"x")
assert service.library_left_behind(db, str(_root)) is False
def test_deleting_a_user_takes_their_folders_and_files_with_them(db, make_user):
# Both tables cascade from users; the files' folder FK refuses deleting a folder that still holds
# files, which must not stop the account's own deletion.
+44
View File
@@ -498,6 +498,50 @@ def test_an_upload_to_a_folder_it_may_not_use_is_refused_before_its_body_is_read
assert db.execute(select(DownloadJob.id)).all() == before
def test_an_upload_holds_its_folder_only_once_its_file_is_about_to_be_in_it(
db, make_user, as_user, _root, upload_headers, monkeypatch
):
# Held from the start, the folder waited out the probe and the poster (up to a minute) before a
# rename or a delete of it could go on; not held at all, a delete could take it from under the file.
alice = make_user()
own = _own(db, alice.id)
steps: list[object] = []
real = folders.own_folder
def own_folder(db_, user_id, folder_id, *, hold=True):
steps.append(("folder", hold))
return real(db_, user_id, folder_id, hold=hold)
def probe(_p):
steps.append("probe")
monkeypatch.setattr(folders, "own_folder", own_folder)
monkeypatch.setattr(uploadmod.probe, "probe_json", probe)
r = as_user(alice).post(
"/api/files/upload", content=b"x", headers=upload_headers("a.txt", folder=own.id)
)
assert r.status_code == 200, r.text
# The route's own look before the body, the ingest's look, the probe, then the hold.
assert steps[-3:] == [("folder", False), "probe", ("folder", True)]
def test_a_file_moved_holds_the_folder_it_goes_to(db, make_user, as_user, monkeypatch):
alice = make_user()
job = _file(db, alice.id)
own = _own(db, alice.id)
holds: list[bool] = []
real = folders.own_folder
def own_folder(db_, user_id, folder_id, *, hold=True):
holds.append(hold)
return real(db_, user_id, folder_id, hold=hold)
monkeypatch.setattr(folders, "own_folder", own_folder)
r = as_user(alice).patch(f"/api/files/{job.id}", json={"folder_id": own.id})
assert r.status_code == 200, r.text
assert holds == [True]
def test_a_folder_deleted_while_its_upload_streams_refuses_the_upload(
db, make_user, as_user, _root, _no_probe, upload_headers, monkeypatch
):
+19 -5
View File
@@ -177,15 +177,29 @@ def test_sidecars_keep_the_full_basename_when_the_title_has_a_dot(tmp_path: Path
assert "Chan_-_2026-08-12_-_Sonka_Hazilag.nfo" not in names # the old truncated orphan
def _mounts(*points):
"""A /proc/self/mountinfo table with these mount points (the fields around them are filler)."""
return "\n".join(f"{i} 1 0:{i} / {p} rw - ext4 /dev/x rw" for i, p in enumerate(points, 22))
def test_a_files_root_on_the_containers_own_disk_is_refused(tmp_path):
# The image's empty /files, left unmounted by an old compose file: every file would 404 and
# every download would go with the container.
assert "not a mounted volume" in files_root_problem(
str(tmp_path), system_root=str(tmp_path.parent)
)
root = str(tmp_path)
plain = _mounts("/", "/proc", "/etc/hosts")
assert "not a mounted volume" in files_root_problem(root, plain, in_container=True)
assert "does not exist" in files_root_problem(str(tmp_path / "gone"))
# On another filesystem than the container's own, and writable: the volume.
assert files_root_problem(str(tmp_path), system_root="/proc") is None
# Its own mount, or inside one: the volume — whatever device it reports. On a storage driver that
# keeps the container's root on the host's disk (vfs) a volume has the same device as /.
assert files_root_problem(root, _mounts("/", root), in_container=True) is None
assert files_root_problem(root, _mounts("/", str(tmp_path.parent)), in_container=True) is None
# A mount point with a space in it, as the kernel escapes it.
spaced = tmp_path / "my files"
spaced.mkdir()
escaped = str(spaced).replace(" ", "\\040")
assert files_root_problem(str(spaced), _mounts("/", escaped), in_container=True) is None
# Outside a container a plain directory is a fine root.
assert files_root_problem(root, plain, in_container=False) is None
def test_the_old_name_of_the_files_root_still_finds_the_files(monkeypatch):
+2 -2
View File
@@ -86,7 +86,7 @@ services:
volumes:
# Downloaded media. Defaults to a Docker-managed named volume; set FILES_HOST_PATH in .env
# to a host directory (e.g. one your Plex server reads) to keep the Plex-style tree there.
- ${FILES_HOST_PATH:-siftlode_files}:/files
- ${FILES_HOST_PATH:-${DOWNLOAD_HOST_PATH:-siftlode_files}}:/files
# Plex media, read-only. Only used when the optional Plex module is enabled: set
# PLEX_MEDIA_HOST_PATH in .env to the host directory holding the Plex library (the local side
# of plex_path_map, default /plex-media). Left unset → an empty named volume (harmless; the
@@ -137,7 +137,7 @@ services:
condition: service_started
networks: [internal]
volumes:
- ${FILES_HOST_PATH:-siftlode_files}:/files
- ${FILES_HOST_PATH:-${DOWNLOAD_HOST_PATH:-siftlode_files}}:/files
# Plex media (read-only) — same mount as the api; used by Plex clip jobs (a later phase).
- ${PLEX_MEDIA_HOST_PATH:-siftlode_plex_media}:/plex-media:ro
mem_limit: 2g
+2 -2
View File
@@ -62,7 +62,7 @@ services:
volumes:
# Downloaded media. Defaults to a Docker-managed named volume; set FILES_HOST_PATH in .env
# to a host directory (e.g. one your Plex server reads) to keep the Plex-style tree there.
- ${FILES_HOST_PATH:-siftlode_files}:/files
- ${FILES_HOST_PATH:-${DOWNLOAD_HOST_PATH:-siftlode_files}}:/files
# Plex library, read-only. The Plex module streams files itself, so it needs to SEE them: set
# PLEX_MEDIA_HOST_PATH in .env to the host directory holding the library (the local side of the
# admin "path map", whose default is /data=/plex-media). Left unset it falls back to an empty
@@ -111,7 +111,7 @@ services:
condition: service_started
networks: [internal]
volumes:
- ${FILES_HOST_PATH:-siftlode_files}:/files
- ${FILES_HOST_PATH:-${DOWNLOAD_HOST_PATH:-siftlode_files}}:/files
# Same read-only Plex library as the API — the worker resolves library paths too.
- ${PLEX_MEDIA_HOST_PATH:-siftlode_plex_media}:/plex-media:ro
security_opt:
+2 -2
View File
@@ -47,7 +47,7 @@ services:
volumes:
# Downloaded media. Defaults to a Docker-managed named volume; set FILES_HOST_PATH in .env
# to a host directory (e.g. one your Plex server reads) to keep the Plex-style tree there.
- ${FILES_HOST_PATH:-files}:/files
- ${FILES_HOST_PATH:-${DOWNLOAD_HOST_PATH:-files}}:/files
# Plex library, read-only. The Plex module streams files itself, so it needs to SEE them: set
# PLEX_MEDIA_HOST_PATH in .env to the host directory holding the library (the local side of the
# admin "path map", whose default is /data=/plex-media). Left unset it falls back to an empty
@@ -91,7 +91,7 @@ services:
bgutil-pot:
condition: service_started
volumes:
- ${FILES_HOST_PATH:-files}:/files
- ${FILES_HOST_PATH:-${DOWNLOAD_HOST_PATH:-files}}:/files
# Same read-only Plex library as the API — the worker resolves library paths too.
- ${PLEX_MEDIA_HOST_PATH:-plex_media}:/plex-media:ro
logging: *logging
+8 -2
View File
@@ -260,7 +260,8 @@ compose file from before still mounts `/downloads` and sets `DOWNLOAD_ROOT`, and
that name. To move to the new layout, download the new
[`docker-compose.selfhost.yml`](../docker-compose.selfhost.yml) over your old one, then:
- **If you set a host directory**, rename `DOWNLOAD_HOST_PATH` to `FILES_HOST_PATH` in `.env`.
- **If you set a host directory**, nothing to do: the new compose file still reads
`DOWNLOAD_HOST_PATH` when `FILES_HOST_PATH` is not set. Rename it in `.env` when it suits you.
- **If you used the default volume**, copy it over once before you start the new version (Docker
cannot rename a volume). Compose names a volume after the project, which is your folder's name
unless you set one, so look the old one up rather than guessing it:
@@ -277,10 +278,15 @@ that name. To move to the new layout, download the new
Open the Files library and check your files play; only then remove the old volume
(`docker volume rm "$OLD"`).
- **If you build from source**, a `git pull` brings the new `docker-compose.yml`, whose default
volume is `files` (it was `downloads`): copy it over the same way, with `downloads` and `files` in
place of `siftlode_downloads` and `siftlode_files`, before you start the new version.
If the files library is not mounted where the app looks, the API says so in its log at start
(`The files library is not reachable`), and the download worker refuses to start rather than write
files into a container that throws them away.
files into a container that throws them away. A fresh, empty volume in the library's place (the old
one not copied over) is a real mount, so the worker runs; the API's log says that too, at start
(`The files library is empty but the database names files`). Copy the old volume over, as above.
**The registry keeps only the newest few releases, not every version the changelog lists.** A pin is
"decide when you take the next hop", not "stay here forever": once you are several releases behind,
+23
View File
@@ -0,0 +1,23 @@
import { readFileSync } from "node:fs";
import { fileURLToPath } from "node:url";
import { describe, expect, it } from "vitest";
// The compose files an install runs from. The library's host directory was renamed (DOWNLOAD_HOST_PATH
// → FILES_HOST_PATH); a `.env` that still sets the old name must keep mounting that directory, not a
// fresh empty volume the app would take for the library. Held here because this lane can read the
// whole repository; the backend's test lane sees only backend/.
const REPO = fileURLToPath(new URL("../../../", import.meta.url));
const COMPOSE = [
"docker-compose.yml",
"docker-compose.selfhost.yml",
"docker-compose.home.yml.example",
];
describe("compose files · the library mount", () => {
it.each(COMPOSE)("%s falls back to the old host-path name on every service", (file) => {
const text = readFileSync(REPO + file, "utf8");
const mounts = text.match(/^\s*- .*:\/files\s*$/gm) ?? [];
expect(mounts.length).toBe(2); // the API and the worker
for (const m of mounts) expect(m).toContain("${FILES_HOST_PATH:-${DOWNLOAD_HOST_PATH:-");
});
});