Release notes for the epic: bilingual mail, one-mail-one-click approval, order-independent gates
with named states, canonical Gmail identity, the admin lifeline for sign-ups stuck outside, and the
four-round closing review that converged 12 -> 4 -> 3 -> 2.
Round 4 came back converged — nothing above low, and both findings in one family. This is the half
worth fixing, because the branch introduced it.
Only the signed-out auth card consumes a `#reset=` token, and S2 moved the address-bar cleanup up to
a hook App mounts unconditionally. So opening a password-reset link in a browser that already holds a
session erased the token from the URL while nothing had read it: the page loads, nothing is said, and
clicking the link again does exactly the same, because the token is untouched and the session is
still there. That is the dead end this epic exists to remove, and `main` did not have it — the strip
used to live inside the card, which a signed-in visitor never renders.
An unspent reset fragment now stays, which restores the recovery that shape always had: signing out
reloads with the fragment intact and the form is waiting. Once the card has spent the token a later
reload meets S4's named dead-link screen, which is true. The affirmative version — a banner telling a
signed-in visitor that reset links open in a signed-out window — is logged with DX-15, along with the
`hashchange` half that still only recognises `#verify=`.
Three low findings, all in what the review rounds themselves wrote.
The comment on `test_approving_an_unverified_account_keeps_its_password` still asserted the argument
rounds 1 and 2 refuted — that dropping the approval-time revoke was safe because `password_login`
reads `email_verified` first — while the docstrings on the two functions it describes now say the
opposite. Two contradictory "why" records for one rule is how the round-1 takeover primitive got
reasoned into existence in the first place, so the test comment now carries the corrected account
and names SEC-16.
`test_a_later_registration_leaves_a_link_already_in_flight_alive` asserted a subset relation that is
vacuously true on an empty set, and the guard that made it non-empty had gone out with the revert.
It now pins both halves: the old link survives, and exactly one new one appears.
Round 2's own fix — activation moved to after a successful send — was unpinned; putting it back
above the send left the suite green. The failed-invitation test now also asserts the account was not
activated by a request the UI reported as a failure.
Round 1 fixed the address pre-emption chain by letting a later registration replace the password on
an unverified account and delete its outstanding verify tokens. Round 2 read that code and showed it
was worse than what it fixed, so it goes back out.
It closes nothing. The rule is symmetric and an attacker can simply register last — on a timer,
inside the five-per-five-minutes budget — while the owner registers once. What it does add is two
primitives an unauthenticated caller did not have: overwrite a real registrant's chosen password,
and delete the confirmation link already sitting in their inbox (the approval mail's 7-day token is
an ordinary verify token, so the blanket delete took that too). Worst of all it fired on the rows
SEC-10 left stripped — password_hash NULL, password_revoked_at set, active — installing an
attacker's password where the entire state means "there is none", and clearing the stamp that is the
only reason password-reset still accepts them. That is a straight takeover which did not exist
before, in the code written to prevent one.
The owner's recourse needed no new primitive and already worked: password-reset accepts a
pre-empted account, proves the mailbox, rewrites the hash and bumps the session epoch. What remains
is the bounded window between a confirmation click and that reset, which is SEC-16 — logged with
this attempt written down, so the next person does not reach for it again.
Two smaller round-2 findings go with it. `upsert_pending_invite`'s new exact-spelling tie-break ran
before any status preference, so it could deterministically pick a DENIED sibling over a pending one
and reopen it — the very outcome its comment claimed to prevent; the status preference now comes
first. And `send_invitation` activated the account before the send it might have to report as
failed, so a request the UI called a failure had quietly let someone in; activation now follows a
mail that actually left. The verify token minted to render that mail still commits either way — it
is single-use, expires on its own and was mailed nowhere, and the note says so rather than leaving
the next reader to wonder whether it was missed.
Eleven findings survived adversarial verification; these are the fixes.
**Address pre-emption.** S1 dropped the approval-time password revoke, arguing `password_login`
refuses an unverified account before it reads `is_active`. Two verifiers showed that holds only
while the address stays unverified — and S6's approval mail exists to get the real owner to end that
state, at which point the squatter's password works. While an address is unverified the NEWEST
registration now owns it: the password is replaced and every outstanding verify token deleted, so
the owner takes the row back simply by registering, and a link already in flight cannot confirm it
for anyone else. The residual (an owner who confirms and neither registers nor resets) is logged as
SEC-16 beside SEC-15, where the re-attestation path it needs already lives. The comments that
asserted the old, false invariant now say what actually guards this.
**The entry URL.** S2 moved `clearEntryUrl()` out of the signed-out auth card into a hook App mounts
unconditionally, and it blanket-stripped the whole query string, the fragment and `history.state` on
the FIRST commit. That broke first-run setup outright — the wizard mounts only after its query
resolves and then finds no `?token=` — and silently ate `?link=`/`?oauth=` (no toast, no refetch
after connecting Google), `?v=`/`?chan=` deep links, and scroll restoration. It now clears only the
fragment and the two one-time flags it owns, and preserves `history.state`.
**The env allow-list.** S3 canonicalised the Invite branch of `is_allowed` and left the
ALLOWED_EMAILS/ADMIN_EMAILS fallback matching literally — the 2026-09-03 lockout with a different
source of truth, plus a shadowing trick where an unauthenticated request under a sibling spelling
permanently masked an env grant. Canonical on both sides now, and the same for the delete dialog's
warning and the ADMIN_EMAILS role bootstrap.
**Honest states.** `send_invitation` stamped "I already wrote to them" before a fail-soft background
send; it sends inline and records only what left. The admin-side resend answered `{ok: true}` for a
dropped mail; it now says so. Both also activate/serialize consistently with the other decide paths.
**Correctness sweep.** The 7-day approval link said "expires in 168 hours" — durations render in
days once there is more than one. `_register_account`, `upsert_pending_invite` and `add_invite`
picked among canonical siblings with no ORDER BY and no exact-spelling tie-break, so which account
got the re-send, and whether a denied row was reopened over a pending one, was up to Postgres.
`purge_user` deleted every canonically-equal invite, revoking a surviving sibling account's access.
`ConfirmProvider` wrapped its ReactNode message in a `<p>`. Approving no longer leaves the
stuck-sign-ups list stale. The refusal panels announce and take focus.
**Tests.** Three mailers rewritten this epic never rendered in any test; every `send_*` now renders
in both languages. The orphan-key guard could not fail (it scanned the catalog that defines the
keys) and had no reverse direction. Newly pinned: canonical activation, the surviving sibling's
grant, a failed invitation and resend, an expired reset link, a throttled login's silence, the
per-language admin fan-out, and that the entry URL keeps what it does not own.
Twelve mails carried hardcoded English while the app itself has enforced HU/EN parity since E5.
A mail is the one user-facing surface nobody can re-render by switching the UI language: it arrives
once, in whatever language we picked, and stays that way. That made the epic's own headline mail —
"one mail, one click" — English for a Hungarian reader.
The text moved to a catalog (`mailtext.py`) with a `text(key, lang, **vars)` renderer, and the parity
rule is now a test rather than a habit: every key must carry both languages AND the same
`{placeholders}`. A translation that drops `{link}` sends a mail with no link in it; one that invents
a placeholder raises inside a background task nobody is watching. Both are silent in production.
Every `send_*` takes the language as its second argument, resolved by the REQUEST handler and never
inside the mail — these all run as background tasks, after the request's session is gone, which is
the same reason the approval mail computes its link in the handler.
Where the language comes from, in order: the account's own preference; failing that, the language the
person asked us in; failing that, English. The middle one is new — `invites.lang`, migration `0082` —
because the mails an access request produces go to an address that usually has no account yet, and
the signal does exist: the page their form was submitted from, or the locale Google reported for a
sign-in we refused. Captured rather than derived, for the third time in this epic (`google_email` in
S3, `preferences.language` in S6 taught the same lesson): a signal that exists only in one moment
cannot be backfilled later. So the admin is asked in exactly one place — the invitation to an address
they typed in themselves, where nobody has ever told us anything.
That send is now a dialog rather than a bare click, which is also where the "you already wrote to
them" warning belongs — it used to live only in a tooltip the admin may never hover, guarding the one
action whose failure mode is mailing a real person twice.
S6's registration `lang` field turned out to be dead on arrival: the backend accepted it, the
frontend never sent it, so every account has been storing nothing. The request builders now stamp the
UI language themselves — a signal that has to be passed in by every caller is one every caller can
forget, which is exactly how it shipped unset.
Admins are notified one mail per language group instead of one blast to everyone. They are people
with their own UI language; a single message would have to pick one of them and be wrong for the rest.
Also removes a duplicated `invited_at` column declaration on `Invite` (two identical definitions
landed in S6).
The funnel's common ordering made a person open TWO messages: one saying their access was approved,
another asking them to confirm their address. The approval mail now branches on what they actually
still have to do — carry the confirmation link, point at sign-in, or say a confirmation mail follows
once they register — so the usual case is one mail and one click. A mail that guesses wrong is worse
than a plain one: telling someone to sign in while their address is unconfirmed contradicts the
screen that will refuse them.
That embedded link lives 7 days rather than the usual 24 hours. Nobody sits waiting for an approval —
it can easily be read on Monday after a weekend, and an expired link spends the one-mail promise and
puts them back on two. The risk is small: the token only ever confirms an address; it signs nobody in
and sets no password.
The most likely root cause of the 2026-09-03 report that a confirmation mail "never arrived" is here
too, and it was never a delivery failure: re-registering an address that already had an unconfirmed
account returned in SILENCE — same cheerful "check your inbox", no mail sent at all. It now re-sends
the link. Nothing new leaks: the response and its timing are unchanged, and the public verify/resend
already does exactly this for the same input.
Whitelisting stays silent, and that is a decision, not an omission. The operator opens a door as a
possibility — usually already agreed with the person — and a row can sit approved for weeks with
nobody registering; a mail fired automatically there would be nudging someone who never asked.
Telling them is its own act on its own button, `invited_at` records it so a second click is a
decision rather than an accident, and the button only appears where nobody is behind the address yet:
"the door is open, come in" is meaningless to someone already inside.
Two things UAT caught that no test would have. Every fresh registration appeared in BOTH admin lists
at once, because the stuck-sign-ups filter keyed on "unconfirmed" — the rule is now "the address may
sign in, and this account still can't", which leaves an undecided request with the queue that owns
it. And the invitation button was offered on every approved row, half of which are existing users.
Also: the confirmation mail finally says what its link's rules are (once, 24 hours) — the reset mail
always has, while this one left the reader to discover both by meeting a dead link. The card's
"didn't get the email?" moves up under the form, and the three waiting messages name the spam folder,
which is where a first message to a fresh recipient sometimes lands.
Registration now records the language the sign-up page was in. Nothing reads it yet — the bilingual
templates are S7 — but it is the only moment that choice exists anywhere the server can see, and a
preference nobody recorded cannot be backfilled later.
UAT on localdev: re-registering re-sent the link (one token became two, one account); approval issued
a 7-day token and moved the account into the stuck list with only a re-send; whitelisting mailed
nobody; the invitation recorded itself and the row then warned that sending again would write twice.
Test data removed.
Approve an address BEFORE the person registers and their sign-up produces no queue row at all —
`_decide` only takes a still-pending invite — so the Access-requests screen sat empty, the tab badge
read zero, and the only working move was re-typing the address into the whitelist box. Nobody would
guess that, and on 2026-09-03 nobody did.
This is roadmap UX-25, where two earlier attempts were reverted after review. Both moved AUTHORITY:
auto-activating on registration turns a standing whitelist entry into a bearer grant for whoever
registers the address first, and reopening the approved invite to `pending` lets an anonymous sign-up
REVOKE a standing approval. What was actually missing was visibility, so this changes nothing about
what an unauthenticated caller can cause — the admin could already do exactly this by re-entering the
address; they just had no way to know they had to.
The section lists every account that cannot sign in yet and says WHICH gate is shut, because the two
dead ends look the same from the admin's chair: waiting for activation, or waiting on a confirmation
mail. Naming the unconfirmed ones is not decoration — on a no-SMTP instance that is the difference
between the owner and whoever registered the address first (SEC-15), and an admin about to let
someone in should see it. A person the queue above already covers is deliberately NOT listed here;
two buttons for one person is worse than one.
Activate is gated on `is_allowed` — the same function the sign-in paths consult, in core, so the
button that appears and the badge that counts cannot disagree. Without that gate it would
manufacture an inconsistent account: password sign-in only checks `is_active` and would let them in,
while their Google sign-in would be turned away and silently reopened as a fresh access request.
Letting in someone with no approved invite stays the whitelist box's job, which says so out loud.
The badge counts activations SEPARATELY from pending invites rather than widening an existing
field's meaning, and only counts what genuinely waits on the admin: an unconfirmed account waits on
its owner, so it is listed with a re-send but does not nag. The admin-side resend says plainly what
happened, including refusing when the instance has no working SMTP — mail is fail-soft everywhere
else, and that silence is exactly what left the 0.78.5 sign-ups with nothing to fall back on.
`send_verification_link` is now one function with three callers (registration, the public resend,
this one), so the link's shape and TTL cannot drift by who triggered it.
UAT on localdev, both languages: the UX-25 shape reproduced end to end (approve the address, then
register), the badge counting it, Activate letting them in and dropping the badge, the row losing
its Activate but keeping the re-send, a fresh token issued by the re-send, and both actions in the
audit log. Test data removed.
Reported from UAT: delete an account, then open its password-reset link. The card drew the full "set
a new password" form — because a `#reset=` fragment was present, and nothing more — and only after
the user had typed a password did the server answer 400. Measured first: no security hole. A user's
tokens cascade away with the row, so nothing can be set on a deleted or a re-created account. What
was left is a dead end of exactly the kind this epic exists to remove, and it is not rare: a reset
link lives one hour, mail is slow or lands in spam, and whoever got two mails clicks the older one.
password-reset/check answers whether a link is still usable WITHOUT spending it, so asking can never
cost the user their one real attempt — the property the tests pin hardest. It gets its own limiter,
because opening a link must not eat the budget for requesting one, and a throttled caller is told
"ok", never "dead": this check may only ever save someone a wasted form, so when it cannot answer it
degrades to the old behaviour instead of declaring a live link finished. The confirm endpoint stays
the authority, and its failure raises the same named screen, since the token can die between the two
calls or the probe itself may have failed.
A too-short password is deliberately NOT that screen. The length check runs before the token is
spent, so a typo costs the link nothing, and the card tells the two 400s apart by `reason` so only
one of them takes the form down.
Both email-link confirmations (verify, password-reset/confirm) now answer in the {code, reason}
shape S4 introduced. They were the last refusals a user meets by simply clicking an old link while
still being answered in hardcoded English under a bilingual UI. The seven remaining bare strings in
this module (register, request-access, the demo guards, set-password) sit behind client-side
validation the UI does first; they are logged as a follow-up rather than swept in silently here.
One bug found by the UAT itself, in the new code: the check went out FOUR times per opened link —
StrictMode double-invokes effects and the shell remounts the card as the session probe settles.
Harmless per request, but against a per-IP limit it would exhaust the budget in two reloads and then
silently fall back to drawing the form unchecked: nothing errors, the feature just stops working.
Deduped in a module-level map holding the in-flight promise (a ref dies with the remount that causes
it); a failed probe drops itself so a blip is never cached as "dead". The test renders the card
twice, because with one render the guard would rot undetected.
UAT on localdev: the reported scenario end to end (delete the account, open the link) shows the named
screen and no form; a live link still opens the form and completes; the CTA lands on the request-a-
link form; one probe per opened link. Throwaway accounts removed.
"Your account is awaiting admin approval." was true and useless. It never said WHICH mailbox the
account was on, and on 2026-09-03 that silence hid a Gmail alias mismatch for a day: a registration
as np.temu@gmail.com met a Google claim of nptemu@gmail.com, and every screen in the funnel agreed
to say nothing about it.
Every refusal password-login can answer with now uses the codebase's structured {code, reason}
detail, built in one helper. The three that arrive AFTER the password is proven carry the address on
the account plus both gate flags; the two that answer before it (invalid, rate_limited) carry
nothing, so a wrong password and an unknown account stay byte-identical. The frontend renders the
first three as a named screen in place of the form — there is nothing to retype once the password is
correct — with an icon, the two-gate checklist, the address in monospace, and a resend CTA where one
helps. Reporting each gate from its own flag is the payoff of S1: approved-but-unverified is a real
state now, and a screen that assumed a sequence would send that user off to wait for an admin who
has already decided.
The Google access-request notice names the address too, and says so when the request was already on
file under ANOTHER spelling of the same mailbox — the honest version of "we didn't open a second
one", stated only when it applies. It moved from the query string to the fragment: the notice now
carries an address, and a query string lands in every reverse-proxy access log. Same reasoning that
put the verify/reset tokens there, and the same owner already clears it. urlencode, not an f-string,
because URLSearchParams reads a bare + in a fragment as a space and would mangle exactly the
+tag addresses this epic exists to protect.
upsert_pending_invite returns the row it settled on beside the is-new flag, since the row's stored
address is what the notice has to name and what mail will go to.
Deviation from the PendingScreen mockup, deliberately: no "Sign out" button and no separate "Not
your address?" link. The mockup drew the panel in the app shell; the accepted decision (a) keeps the
pending user session-less, so there is no session to end, and the address is named directly above a
"Back to sign in" that answers the same question.
UAT on localdev, both languages: all three refusals with the typed spelling deliberately differing
from the stored one (the panel named the stored one), the resend CTA carrying the typed address into
the resend form, and both access-request banners with a +tag address surviving the fragment round
trip. Throwaway accounts and the language switch reverted.
An account can now hold two true addresses: the one its owner typed, which a Google
sign-in no longer overwrites, and the one Google answers with. Only the first was
stored, so Settings could say 'Connected' without saying connected AS WHOM -- exactly
what someone who registered with a +tag needs to know.
users.google_email (migration 0080) records Google's answer at sign-in and at an
in-app link. /api/me exposes it ONLY when it differs from the account address, so the
comparison lives in one place and the majority, whose two addresses are the same
string, see no change at all. Rendered in the account menu as a muted third line under
the identity, and in the Settings sign-in row under the existing hint.
A short 'Google' label rather than a brand glyph: the app draws one icon set (lucide),
and a generic mail icon next to an email address says nothing. It also reads to a
screen reader, which an unlabelled logo would not.
No backfill is possible -- Google's answer is only known at sign-in -- so accounts
linked earlier stay NULL until their owner next signs in with Google.
Two halves of one rule: the address someone typed is theirs to keep, and it must be
the one that gets them back in.
A plus-tagged or dotted Gmail is often a deliberate choice -- registering as
me+siftlode@gmail.com is how you find out later which site leaked your address. The
Google callback overwrote it with the account's primary, which can never contain a
'+', so the tag vanished on the first Google sign-in and, because sign-in matched the
stored address, took their chosen address with it. The rewrite line is older than
this epic, but S3 made it reachable here by matching adoption across spellings. It
now runs only when the mailbox GENUINELY changed, and lives in a named helper rather
than inline, so the rule has one home.
The three lookups that resolve a typed address -- password login, password reset,
verify resend -- go through find_user_by_email: exact spelling first, then the unique
canonical candidate, and None when several accounts share a mailbox rather than
guessing which one a password should open. Reset and resend previously answered a
different spelling with silence (they reply uniformly by design), which was a dead end
with no way out. Their mail now goes to the address on the account, never the one
typed into the form.
Gmail delivers x.y@, xy@ and xy+tag@ to one inbox; the invite gate only lowercased.
On 2026-09-03 that turned an approved user's Google sign-in into a silent SECOND
access request -- OAuth returns the account's stored primary, which need not be the
spelling they typed -- and left prod with two user rows for one mailbox (ids 13, 14).
The +tag case fails every time: a Google account cannot contain +, so OAuth can only
ever answer with the base address.
Mail still goes to the address AS TYPED; only identity matching uses the canonical
form. utils.canonical_email is the single definition, and a model validator derives
users.email_canonical / invites.email_canonical on every write, so no call site can
forget it. Scope is narrow on purpose: dots are significant on most providers and the
Gmail rule does not hold for Workspace custom domains.
Swept every sibling of the same principle, not just the reported one: is_allowed,
upsert_pending_invite, the Google-callback adoption, _register_account (so no new
duplicate pair can be created), _activate_user_by_email, admin _accounts_for (an
invite backing a live user under another spelling used to look deletable) and
add_invite, plus purge_user, which now erases every canonically-equal invite instead
of leaving one behind that still grants access.
Migration 0079 backfills both columns and indexes them NON-uniquely: prod already
carries canonical duplicates (approved invite pairs since 2026-06-16), and merging
accounts is a judgement call about people's data, not something a migration does on
its own. A test pins the backfill SQL against the Python helper.
Found in UAT. Navigating a tab that already runs the app to a URL differing only in
the fragment is a same-document navigation: nothing reloads, so the import-time entry
snapshot never sees the token. It sat unconsumed in the address bar and the previous
outcome stayed on screen -- the same silence this sprint set out to remove, wearing a
different hat. Pasting the emailed link into a running tab does exactly this, and our
verification mails were plain text until 0.78.8, which makes pasting the normal way to
use one.
A hashchange listener now picks up the new token, the guard tracks consumed tokens
rather than a single fired flag (still exactly one POST per token), and a fresh link
clears the standing outcome instead of leaving the old banner up.
The token was only ever consumed inside Welcome.tsx, which App renders ONLY when
there is no session. Opening the emailed link in a browser that already held a
Siftlode session posted nothing, the fragment was then stripped, and the user got
no signal at all -- the link simply did nothing. Incognito worked, which is why it
survived. Confirmation now happens in App, above that branch: signed out the outcome
still drives the auth card's banners, signed in it drives a top-of-app bar.
The entry URL is snapshotted once at import time (lib/entryUrl) instead of per
component, so no future URL writer can strip a token before whoever needs it has
read it -- that ordering race is what broke this in the first place. POST /auth/verify
now names the address it confirmed, which matters when the browser holds a session
for a different account; the same reasoning as password_reset_required already
covers the disclosure.
Also here, from the 2026-09-02 review tail: the dead GET /auth/verify goes (both
senders emit the fragment form, and the last query-token link expired 24h after the
0.78.7 deploy), a spent #verify=/#reset= fragment is cleared while signed in, and
the auth-card banners get role=status. The verifyOkReset copy no longer blames
admin approval, which E9.5 S1 made false.
SEC-10 revoked any password set while an account's email was unverified, on both
the Google-adoption and the admin-approval path. On the approval path that was
redundant: password_login refuses an unverified account before it ever reads
is_active, so approval hands a pre-emptor's password nothing it could use. All the
revoke achieved there was destroying the password a legitimate registrant had just
chosen -- and since the admin normally decides before the user reads their mail,
'your password was cleared for security' was the DEFAULT experience, not an edge
case. The guard stays on the Google-adoption path, where the real owner does attest
ownership.
password_reset_required and the ok_reset banner stay: accounts stripped on prod
before this change have no other way back in.
Two existing tests pinned the old rule, so they are rewritten rather than deleted,
and the SEC-10 recovery pack now builds the revoked state through the surviving
producer.
E9 Playlist module: total playtime in both playlist headers, the header
compacted to two rows, and the sticky column header sitting flush. Plus the
six defects the epic-end deep review confirmed.
Round 2 mutation-checked round 1's own fix and found the one line it left
uncovered: every table row was an integer, so `Math.floor(sec)` in the new
seconds tier could be deleted or swapped for round/ceil with the suite still
green — exactly the "later cleanup removes it as redundant" failure the fix's
comment claims to prevent. Two fractional rows kill all three mutants.
Epic-end deep review, round 1. Six findings survived verification; five of them
were one defect wearing different hats.
formatRuntime floored 1-59s to "0m". Harmless while it only ever formatted a
Plex movie's length, but 12D repurposed it for an aggregate, and a total is the
only input that can land under a minute: a playlist of Shorts reported "0m"
while the rail beside it read "0:45". Fixed in the function, not behind a
`>= 60` guard at each of the seven call sites — the invariant belongs where it
cannot be forgotten. Its contract comment claimed "Plex movie/episode lengths"
and was two epics stale.
The rail rendered the same playlist total as formatDuration (1:23:45) while the
new header rendered formatRuntime (1h 23m) — two shapes of one number, side by
side on one screen. The rail now uses formatRuntime too; formatTotalHours had
already recorded that H:MM:SS is wrong for an aggregate.
The rename input kept min-w-0 without flex-1 in the compacted row, so it was
the only shrinkable child beside a shrink-0 action cluster. The Plex half of
this same epic already had the fix; this restores the symmetry.
plex.browse.items had no plural forms, so a one-item Plex playlist read
"1 items". Pre-existing, but the new header is the call site where count=1 is
ordinary. Both languages get both forms, no key drift.
formatRuntime had no unit tests at all across seven call sites. Added a tier
table plus a sweep asserting no non-zero second ever renders as "0m".
Dropped after 3/3 adversarial refutations: the meta-line segment ordering
(the filtered count is labelled, and count-then-runtime is the convention) and
the null-duration lower bound (the server's own SUM has skipped NULLs since
long before this branch; changing only the client would split them).
Parity with the YouTube playlist header (E9 12D): the Plex playlist detail
now carries a meta line under the title — "N items · Xh Ym", summed from the
items' duration_seconds. No backend change: leaf_card already serializes
duration_seconds for both movies and episodes, and no new i18n key either —
the count reuses plex.browse.items, the same key the collection header uses.
The title/rename input moved into a min-w-0 flex-1 column so the meta line
sits under both; the line is hidden on an empty playlist.
The header portals into the shell's FIXED toolbar band, so its height is
list height the user never gets back — and it was spending four stacked
blocks on it: title, meta line, an action row, then a separate view-control
row under the cover. Option B collapses that into two tight rows beside a
smaller cover: title + rename/YouTube-link on the first, with Play-all,
push/revert/delete and the unsynced badge pushed right; the meta line
(count · playtime · filtered) and the view controls (group-by, reset view,
save order, view status, undo/redo) sharing the second.
Every control and its gating is unchanged — the view-control group still
appears only for `items.length > 1 || viewActive`, so a one-item playlist
shows just the meta line.
Measured on a 32-item playlist: the band goes 170px -> 88px at rest
(122px while a view is active, where the status sentence wraps), which is
~80px more visible list.
The playlist content wrapper carried `pt-3`, so its sticky column header sat
12px below the scroller top at rest and jumped up to `top:0` on the first
scroll. Drop the top padding so the header is flush from rest and never
shifts — the fixed toolbar band above supplies the breathing room, matching
the channel table's already-correct pattern.
Surface the playlist's total playtime beside the item count in the detail
header (12D) — sums every item's duration (formatRuntime "h m", matching the
approved mockup), hidden when nothing sums. Data is already client-side; no
backend change.
Pass fadeTop:false for the playlists page (12B) so the shell's top edge-fade
no longer sits over the already-sticky column header (tableHeader.tsx:257),
matching the channels/audit pages.
The bodies are text/plain only, so whether the URL in a verification or
password-reset mail is a link at all was the client's decision. Gmail, Outlook and
Apple Mail linkify plain text; lighter web clients render the body verbatim and leave
the link as dead text — in a message whose entire purpose is that one link.
_send now attaches an HTML part generated from the SAME plain body, rather than
per-template HTML that would have to be kept in sync with it: one converter, all
eleven templates, and text/plain stays the primary part and the source of truth.
Escaping runs before linkification — bodies interpolate untrusted values (a
requester's address, the operator contact) — so no caller can inject markup, and a
query string's `&` is already `&` when it reaches the href, which is what an HTML
attribute wants. Sentence-final punctuation is trimmed out of the href while
url-safe token characters (`-`, `_`) are left alone. Inline styles only, no images,
no external CSS, no tracking.
Review found the backfill's fourth predicate `AND email_verified = false` strands
exactly the subset that needs it most. The revoke does not invalidate the account's
outstanding verification token, so clicking the emailed link is the natural next
thing such a user does — and it sets email_verified=True while password_hash stays
NULL. That row then has no route back at all: reset ineligible, resend refuses an
already-verified address, set-password needs a session the account cannot obtain,
and nothing re-stamps it because the revoke itself is guarded on being unverified.
The remaining three predicates already pin the victim set exactly: registration and
the setup wizard always set a hash, every Google row carries a google_sub (adoption
assigns it before revoking), and nothing in the codebase ever clears google_sub — so
a local, non-demo, passwordless row can only have come from the revoke. Widening is
therefore safe, and it is the argument the docstring was already making while the
SQL contradicted it.
Also corrects that docstring: set-password is unreachable because the account cannot
authenticate at all, not because the epoch bump killed a session — an unverified
account is refused at login before a session is ever minted, so it never had one.
Two independent bugs made an email+password registration unrecoverable in prod.
The verification link did nothing. urlWithParams/clearParams rebuilt the URL as
pathname+query and dropped the fragment — but the one-time auth tokens ride the
fragment (#verify=/#reset=, SB3), and the providers that mirror nav params
(useUrlMirror in FeedFilters/Playlists/Plex/Channels) sit ABOVE the lazily-loaded
<App> in main.tsx. Their mount effect replaceState'd the token away before the auth
card's chunk had loaded, so the card read an empty hash: the link opened a bare
sign-in page, no request, no banner. Both helpers now carry the fragment over.
The account was then locked out for good. SEC-10 nulls password_hash when an
unverified account is attested (here: admin approval landing before the user could
verify — which the bug above made impossible). That is indistinguishable from a
Google-only account, and reset eligibility keyed off password_hash alone, so no
reset link was ever issued: no password to sign in with, and no way to get one.
users.password_revoked_at records the revocation, reset eligibility honours it, and
setting a password again (reset-confirm or set-password) clears it. An account that
never had a password stays ineligible on purpose — its owner adds one from Settings.
/auth/verify now also answers password_reset_required so the card can say why the
registered password stopped working, instead of leaving the user at the uniform
"Invalid email or password". Telling the holder of a valid verify token leaks
nothing: they have already proved they own the mailbox.
The 0078 migration backfills the stamp for rows carrying the exact lockout signature
(local, non-demo, no password, unverified), so existing victims recover unaided.
Round 4's only finding: the file header and one comment still said Deny stops a
refused person re-asking. It does not — upsert_pending_invite reopens a denied
row as pending — and the delete_invite docstring in the same branch already says
so. The real difference is that Deny records an auditable decision and mails the
requester; Delete forgets the address.
Round 3's correctness/security pass came back clean; what was left said more than
the code does.
- emailOff promised the access-request list is where sign-ups show up. A sign-up
on an address that is already approved or already pending adds nothing to it
(roadmap UX-25), and "only" was falsified by this release's own inbox notice.
- deleteConfirm claimed the admin was dropping "an approval you already gave" —
it is the confirmation for pending and denied rows too.
- sendFailed blamed the mail server for rejecting a message; the reason covers
connect, DNS, TLS and login failures alike, so it now describes the symptom and
leaves the diagnosis to the log.
- ADMIN_EMAILS re-promotion happens in the Google callback only, not on any
sign-in.
Tests: the decided-list copy of the delete affordance was never rendered (both
new cases fail if that branch is dropped), and the throttle release — a
deliberate behaviour the notes advertise — was asserted by nothing; a drop with
no admin yet, or with a failing write, must not silence the following hour.
Round 2 on the feature diff (15 → 12):
- still_allowed_by_env now rides the invite LIST as well as the delete response,
so the confirmation warns while the admin can still change their mind. It
mattered most for a DENIED row on an env-allow-listed address: deleting it
silently converted a refusal into a grant, and the only warning arrived after
the irreversible click.
- Both inbox bodies claimed to name "the most recent" dropped message. The
throttle records the FIRST of each hour and never updates it, so they now say
"one of them", and the not-configured body finally names where to fix it.
- settings.invites.emailOff told the admin they "get no notice when someone
signs up" — rendered directly above the queue that shows exactly that. Only
the email is lost, and it now says so.
- The disabled delete buttons put their reason out of reach: `disabled` drops a
control from the tab order and suppresses its title. Switched to
aria-disabled + preventDefault, the pattern Playlists.tsx already established
for the same reason.
- deleteInvite is quiet, so the 409 the UI handles with a translated toast no
longer also raises the server's English detail as a modal.
- After a completed password reset, Back landed on the reset form again with a
consumed token — the history change made that state reachable. The token is
cleared on success so the reset view stops being the card's root.
- The hu deleteHasAccount named a tab that renders under a different label.
Tests: a dom test for the Access-requests panel covering both has_account
variants and all three delete outcomes, /api/me flag cases, an ADMIN_EMAILS
case, and the env-allowlist test now patches the raw setting so the parsing
stays under test.
Round 1 on the feature diff found 15; the substantive ones:
- The delete control VANISHED on any invite whose address had registered, which
is the ordinary sign-up shape (register writes the User and the pending invite
together). The guard stays broad — that row is the account's approval gate, and
orphaning it strands someone who can then neither sign in nor be approved — but
the control is now a disabled button carrying the reason, on both lists, so an
admin never sees a row silently missing a button its neighbours have.
- Deleting an entry is not always a revoke: is_allowed falls back to the env
ALLOWED_EMAILS / ADMIN_EMAILS lists once no row exists, and an ADMIN_EMAILS
address is force-promoted on its next Google sign-in. The route now reports
still_allowed_by_env and the UI says so instead of claiming access was removed.
- "Deny keeps the row so they can't immediately re-ask" was simply false —
upsert_pending_invite reopens a denied row. Corrected everywhere it was stated.
- The Configuration warning reads me.email_configured, which save() did not
invalidate, so it kept warning about fields the admin had just filled in.
- The read-only variant was an aria-hidden span explained only by a Tooltip that
the hints toggle can switch off; now a disabled button with title + aria-label.
- The delete error path threw away the 409's reason (the stale-list case) and
left the stale row on screen.
- The throttle window was spent even when no notice was written, silencing the
next hour on the path whose job is to stop silent drops.
- email_enabled() opened a second session and decrypted the SMTP password on
every /api/me poll; it now takes the caller's session.
- welcomeMode.dom.test.ts never rendered the card, so reverting the history
wiring to useState left it green. A render test now drives the real links and
fails on that revert (verified).
Plus /api/me flag tests, the registration-shaped pending case, the env-allowlist
case, and a release note that matches what the code does.
Three operator gaps, all found the same way — a person could not sign up and the
app showed nobody anything.
- DELETE /api/admin/invites/{id} with a delete control on both the pending
requests and the previously-decided list. Deny keeps the row so the person
cannot immediately re-ask; delete forgets the address. Refused with 409 while
a User row exists for it, because is_allowed reads that row and removing it
would revoke a live user's access with no other sign — the list ships
has_account so the UI withholds the button instead of offering one that fails.
- Email is fail-soft by design, which had come to mean invisible. _send() now
records an email_undelivered notification for every admin when a message is
skipped or rejected, naming the message that was lost, throttled to one an
hour. /api/me carries email_configured, driving a standing warning on
Configuration → Email / SMTP and above the access-request list.
- The sign-in card's Create account / Forgot password / Didn't get the email
views are history entries (useHistorySubview), so Back returns to the previous
view instead of only moving the address bar.
Also: the per-test rate-limiter reset sweeps every loaded app.* module rather
than a hand-kept list of three — this change added a limiter outside it.
Round 6's two remaining nits. The operator note said "Configuration → Email"
but the group renders as "Email / SMTP" in both locales, and
test_an_admin_can_activate_a_pre_approved_registrant requested make_user without
using it — a leftover from the reverted rounds that made the test look like it
seeded an admin when it did not.
Round 5's correctness/security pass came back clean; what was left was text that
said more than the code does.
- The register-path notify comment (and its test) claimed the admin "is still
told". The call fires, but on a no-SMTP instance _send drops it — which is the
open half of the problem, not something this branch fixed. Both now say so.
- The release notes tell admins what to actually do: an account whose address was
whitelisted in advance has no pending request to approve, so the whitelist box
is what activates it. That instruction only existed in the roadmap and in
chores, which the dialog does not render.
- "That one line is the whole production change" now accounts for the test-only
RateLimiter.reset() that also ships.
- The rate-limiter test claimed to pin that blocked attempts are not counted, on
an assertion that held either way. Replaced with one that drives the clock
across the window boundary and fails if hammering extends it.
Round 4 showed the `inv is not None` gate added in b5a1002 removed a signal that
matters: for an address the admin had already approved, that email is their only
notice that someone has now created an account on it — the invite is not pending
so nothing lands in the Access-requests queue either. Suppressing it left the
registrant at "awaiting admin approval" with the admin unaware they existed. The
duplicate it avoided (Request access, then sign up) is mild noise by comparison.
The production change is now one db.commit(), which is all the reported bug ever
needed. Release notes corrected again: a previously-denied address was also
unaffected, the pending-request case never lost its queue entry (only the
account behind it), and the test inventory was missing a guard.
Round 3 of the review killed the reopen from b5a1002: flipping an approved
invite back to pending let an unauthenticated POST /auth/register REVOKE a
standing approval for any whitelisted-but-unclaimed address, which then fails
is_allowed() and locks the real owner out of Google sign-in — the primary way
people get in here. It also re-armed the pre-emption window it was meant to
close, because with no SMTP email_verified is set True and the SEC-10 guard the
design leaned on never fires.
Two attempts at fixing the stranded-account UX in the same change both came back
worse than the wart. What remains is the narrow, real bug: the account was
silently rolled back and is now committed. An admin still binds the approval to
the account, exactly as before this branch. UX-25 in the roadmap records the
follow-up and both dead ends so they are not retried.
Also from round 3: the upsert docstring no longer claims the admin UI cannot
reach these accounts (re-entering the address in the same panel's whitelist box
does, and a test now pins it), the release notes are scoped to what the diff
actually changes with the operator note moved where the dialog renders it, and
RateLimiter has unit tests so reset() is not production code only a fixture
calls.
Replaces the activation added in ea931dc, which round 2 of the review showed was
a real weakening: on a no-SMTP instance it made a standing whitelist entry a
bearer grant — the first anonymous party to register an approved-but-unclaimed
address got an immediately usable account under that identity, with no
attestation, no admin action and no signal anywhere. The verify-time activation
had the same shape one step removed, and neither site ran the SEC-10 preset-
password guard or left an audit trail.
Keep a human in the loop instead. An approval granted before any account existed
was a decision about the ADDRESS, so registration reopens the invite
(upsert_pending_invite gains revive_approved, used only by the register worker).
The request lands in the Access-requests queue, approving it runs
_activate_user_by_email — and with it revoke_preset_password_if_unverified — and
the account activates. One mechanism, already audited, no new grant path, and
the "awaiting admin approval" copy is honest again.
The explicit commit from the previous commit still matters: with an invite
already pending, upsert returns without committing and _issue_token is gated on
SMTP, so a no-SMTP registration was still being rolled back.
Also from round 2: gate the admin notice on a fresh decision (matching the two
other upsert callers) so a retry no longer re-pings every admin, and reset the
module-level rate limiters between tests — the suite pooled every login into one
300s window and was two logins short of failing an unrelated test with a 429.
Follow-up to the commit fix, from the deep-review. Persisting the account was
only half the story: when the admin had approved the address BEFORE the person
registered, the account landed is_active=False against an invite that is no
longer pending — absent from the Access-requests queue, and approve_invite 409s
on an already-decided invite. The sign-up worked and still could not sign in.
Derive activation from is_allowed() at the moment ownership is attested:
- verify_email_confirm activates a pre-approved account when the emailed link is
confirmed (only the mailbox owner can follow it), so SEC-10 stays intact;
- _register_account activates only when there is no SMTP to verify with, where
the admin whitelist is by design the sole gate — the same one add_invite
already activates on.
Tests: the pre-approved no-SMTP case and the verify-activates case are real
regression tests (both fail without this change); guards cover the unknown-email
and denied->pending branches, verification of an unapproved account, and the
first end-to-end coverage of the /auth/register route and its
allow_registration gate. Release notes rewritten — the previous entry miscounted
its regression tests and advertised an email fix this release has no code for.
_register_account() flushed the new User but relied on someone else to commit:
upsert_pending_invite() commits only when it actually writes an invite row, and
_issue_token() runs only when SMTP is enabled. For an email an admin had ALREADY
approved, on an instance where email is unavailable, neither fired — the session
closed and the account was rolled back. The would-be user got the uniform "ok"
and no account, could not sign in, and re-registering was a silent no-op.
Commit explicitly after the invite upsert (a no-op when upsert already committed
the same transaction). Three DB-lane regression tests cover the pre-approved
no-SMTP path (fails without the fix), the unknown-email path that always worked,
and the pre-approved path with SMTP on.
hls.js startPosition:0 so the transcode/remux HLS session starts VOD-style
at the requested position instead of chasing the live edge of the growing
EVENT playlist.
Our HLS is a growing EVENT playlist with no ENDLIST, which hls.js reads as
LIVE. Its default startPosition (-1) then starts at the live edge and hugs it
(no forward buffer → rebuffer spinners), and on a resume/seek session the
segments' absolute PTS (-copyts, offset by the server's -ss) don't line up
with the live-edge timeline → 0 fragments load → permanent stall. The
seek-restart model makes fragment 0 the requested content position, so start
VOD-style at 0 and buffer forward. Fixes the transcode playback stall/rebuffer
found in 0.78.2 UAT.
Deep-review round 1 on bug/download-mediakind-probe found a real HIGH the prior
review missed:
- resolve_media_facts used a per-field `probe or info` fallback, so a probe that
RAN and deliberately found no video track (cover-art-only audio: attached_pic
skipped; a still image: format-guarded) had its None video overridden by
yt-dlp's stale vcodec. An audio-mode download from a progressive source (info
carries the source's video codec, embed-thumbnail on) was then classified VIDEO
-> a Play button + a broken in-app <video> with no video track. Only the
download path regressed (upload calls probe_media directly).
Fix: gate precedence on whether ffprobe RAN, not per-field. If the probe read
the file, its codec verdict wins outright (a None means 'no such track'); only a
full ffprobe failure falls back to info. Dimensions still gap-fill from info.
Refactored the parsing into _facts_from_probe so resolve_media_facts can see the
raw probe-ran signal; probe_media keeps its 5-tuple (upload + TestProbeClassifier
unchanged).
- tests: the cover-art-audio and still-image resurrection cases, a differing
populated-info precedence case (the prior-flagged gap), and the ffprobe-failed
info fallback — now stubbing run_ffprobe_json so the real parsing + precedence
run together.
Backend gate green (ruff + full pytest).
Deep-review round 2 on the round-1 fixes (all low):
- part_key churn (state): round 1's part-key reset re-probed EVERY sync for a
multi-version item (an original + a Plex 'Optimized' copy), because
_media_facts reads media[0]/part[0] whose order Plex doesn't guarantee stable,
oscillating transcode_hw between the two versions. Gate the part-key signal on
a single-version item (len(Media)<=1); codec-change reset still applies to all.
A multi-version same-codec re-encode not self-healing is an acceptable rare
edge; a per-sync re-probe loop is not.
- dead i18n key: this diff's playableClass() collapses to transcode_hw/sw, so the
bare plex.playable.transcode key it orphaned is now unused (knip can't see
dynamic keys). Dropped from both locales, parity kept.
- test: cross-facet narrowing by an active playable class (a co-facet's year
range collapses to the selected subset) — the flip side of self-exclusion,
previously unpinned.
The aria-label+title double-announcement on the card dot is a deliberate accepted
trade-off (reliable SR name + mouse tooltip). Backend + FE gates green.
Deep-review round 1 on feature/plex-playback-class-filter:
- Sticky watermark (medium): _apply_item reset the bit-depth probe watermark
only on a codec-string change, so a same-codec re-encode (8-bit->10-bit HEVC)
kept a stale video_bit_depth/transcode_hw forever (the backfill only re-probes
media_probed_at IS NULL rows). Also reset when the Plex Part key changes (the
file was replaced), not just the codec.
- i18n parity (medium): the HU playback-class labels were mixed-language (only
'direct' translated). Translated remux/transcode_hw/transcode_sw and the
tooltips consistently to Hungarian (Kozvetlen streameles / Atkodolas).
- Layering (low): _PLAYBACK_CLASSES was module-private yet imported across into
routes.plex.browse; renamed to public PLAYBACK_CLASSES (it is the shared
source of truth for facet order + zero-fill).
- a11y (low): the browse-card playback-class dot conveyed meaning only via a
mouse-hover title; added role=img + aria-label so SR/touch users get the class.
- tests: the NULL/unprobed transcode_hw -> SW fold (filter + facet), facet
self-exclusion under an active playable filter, the migration codec-set ==
HW_DECODABLE_CODECS drift guard, the probe-batch bound + oldest-first order,
the transient probe-failure retry path, and the same-codec re-encode re-probe.
Backend gate green (ruff + full pytest); FE gate green (tsc/lint/knip/prettier/
vitest). NOTE: the facet-vs-runtime disagreement for 10-bit HEVC (C1) is the
known merge-order constraint — this branch's runtime is codec-only; the facet
becomes truthful once BUG1/tonemap's bit-depth-aware routing lands with it. Left
as a sequencing constraint, not code-changed here.
Deep-review round 3: the only surviving finding — a comment-drift nit. The
fallback's cull-yield comment named the route's 'Not available yet' path, but a
culled-key segment request actually returns 'No active playback session' (the
substantive invariant — never a None that 404s as file-not-found — is unchanged).
Reworded to match the route. Concurrency + correctness came back clean.
Deep-review round 2 on the round-1 fix:
- Race (medium): the round-1 identity guard did the supersede check and the
respawn in TWO separate _lock sections. A newer same-key session installed in
the gap was still torn down by _spawn's unconditional pop+kill (the round-1
comment even had the direction backwards). Fold the check into _spawn via a
new replace_only= param: the identity test and the pop+replace now share ONE
lock, so the respawn is a true no-op when superseded/culled.
- Honest states (low): the superseded branch returned current_session(key),
which is None when the key was cap-culled during our out-of-lock wait; the
route turns None into a dishonest 'Media file not found on disk' 404 for a
file that exists. Yield 'current_session(key) or s' so a culled session
degrades to the route's retryable 'not available yet' path instead.
- Hygiene: _want_hw docstring corrected (it is a test-only shim now; production
decides via _select_encode) and the two stale _want_hw references refreshed
(stream.py header, config.py plex_transcode_hw).
- tests: the cap-cull no-respawn/no-None sub-case; the _opencl_present except
OSError branch (glob raising, not just empty); tightened a tautological -vf
assertion. Backend gate green (ruff + full pytest).
Deep-review round 1 on feature/plex-hdr-hw-tonemap:
- F1 (correctness): _select_encode gated tonemap on bit-depth alone, so a
10-bit *SDR* (bt709) source got the HDR hable tone curve applied, visibly
altering an SDR picture where only a 10->8-bit downconvert was needed. Split
the ffprobe gate into a 3-way classifier (_probe_video_kind: hwsafe / hdr /
sdr10); only true-HDR (PQ/HLG) takes the OpenCL tonemap graph, 10-bit SDR
drops to software libx264 (an exact downconvert). Applies to both auto and on.
- F2 (race): the runtime HW->SW fallback popped+killed _sessions[key] with no
identity check. Because wait_for blocks OUTSIDE _lock, a concurrent same-key
_spawn (rapid seek-restart) or _enforce_cap cull could kill this session; the
fallback then respawned software over the NEWER session and breached the
transcode cap. Guard the respawn: only fall back if _sessions[key] is still
this session, else yield the currently-registered one.
- tests: 3-way classifier (incl. HLG + empty-probe), real _opencl_present glob,
real wait_for proc fast-fail branch, tonemap-variant fallback, the F1
regressions (auto + on), the supersede/no-respawn race, and the on/opencl
matrix cell. Backend gate green (ruff + full pytest).
Upgrade mode-3's 10-bit/HDR branch from "route to software libx264" (BUG 1's
behaviour) to a full-GPU pipeline: VAAPI decode → OpenCL tonemap (hable,
HDR10/HLG → bt709 SDR nv12) → h264_vaapi. Gen 9.5 (UHD 630) can't tonemap in
the VAAPI VPP (tonemap_vaapi fails), so OpenCL is the only HW route — proven on
the prod iGPU at ~4.2x realtime, ~1 CPU core.
- stream.py: `_select_encode` returns (hw, tonemap); a 10-bit/HDR HW-decodable
source picks the tonemap graph when the OpenCL runtime is present, else drops
to software. `_opencl_present` gates on a registered ICD. `_venc_opts` /
`_hwaccel_in_opts` gain the tonemap variant (named vaapi+opencl devices,
`-filter_hw_device ocl`, hwmap→tonemap_opencl→hwmap reverse). `_want_hw` kept
as the hw-half wrapper. The runtime HW→SW fallback still backstops a session
that emits no segment.
- Dockerfile: add the Intel NEO OpenCL runtime (intel-opencl-icd). It was removed
from Debian trixie, so it's pulled from bookworm (22.43 still supports Gen 9.5;
the .deb runs on the trixie base — verified live). Harmless without /dev/dri.
- route + FE: thread `tonemap` through the session response; the stats overlay
mode row reads "transcode · GPU · HDR→SDR" for the tonemap path.
- tests: tonemap command branch, the (hw, tonemap) selection matrix (auto/on ×
8-bit/10-bit × opencl), start_session tonemap wiring, and the fmtMode tag.
Adds a movie-scoped "Playback" filter to the Plex feed so a user can isolate items by how
they play — the groundwork for collecting HW-transcodable (or no-transcode) versions.
Four classes derived from the stored `playable` + a new `transcode_hw` facet:
- Direct Play (direct), Direct Stream (remux)
- Transcode · HW — playable=transcode AND the iGPU can hardware-transcode it
- Transcode · SW — playable=transcode, software libx264 only
The HW/SW split is precise, not codec-only: a 10-bit/HDR HEVC is HW-decodable yet breaks the
VAAPI nv12 pipeline (the same case plex/stream special-cases), so it must count as SW.
Backend:
- New PlexItem columns (migration 0077): transcode_hw, video_bit_depth, media_probed_at.
Migration backfills transcode_hw codec-only so the filter works immediately.
- `plex.sync.transcode_hw_capable` is the single classifier; the HW-decodable codec set moves
to sync as `HW_DECODABLE_CODECS` and plex.stream imports it, so the catalog facet and the
runtime encoder choice can't disagree by codec.
- Bit-depth backfill (`_probe_media_batch`, wired into sync): probes only HW-decodable transcode
items' video Stream for bit-depth + HDR and refines a 10-bit/HDR HEVC to software. Bounded
per run, watermarked by media_probed_at. A codec change resets the watermark (stale probe).
- Filter + self-excluded facet on a shared `playback_class_expr` CASE (movie-leg only — a show
is an aggregate with no single class). transcode_hw threaded onto the feed/detail/card JSON.
Frontend:
- Multi-select "Playback" Combobox in the sidebar (movie scope, facet-empty drop-out), active
chips, 4-way corner-dot badge (green/blue/amber/red) + tooltip, and an info-page playback chip
with a codec · bit-depth subtitle. New `bg-info` (blue) token, i18n HU/EN parity.
- Fix a regression where the card's playback dot lost its hover tooltip: the full-card reveal
overlay swallowed the cursor; the dot now sits above it (z-20).
Gate: backend full lane + frontend typecheck/lint/knip/prettier/vitest all green. Browser-UAT'd
on localdev (filter narrows to the SW set, facet counts, badge colour + tooltip, info chip).
A 10-bit/HDR HEVC source (e.g. an HDR10 x265 file) died at scale_vaapi=format=nv12
on the UHD 630 (Gen 9.5 VPP: "VAProfile not supported"); ffmpeg produced 0 segments
and the item never played, with no fallback — a retry just re-picked the failing HW
path. An 8-bit HEVC and the same file on libx264 both work.
Two defenses:
- `_want_hw` auto mode now also gates on an 8-bit-SDR source via a new
`_probe_video_hwsafe` ffprobe (bit depth from pix_fmt/bits_per_raw_sample, HDR from
color_transfer) — a 10-bit/HDR source takes the software libx264 path, which
downconverts to yuv420p cleanly. The Plex mirror stores no bit-depth signal, so this
is probed at session start. "on" still trusts the admin and skips the gate.
- `start_session` adds a runtime HW→SW fallback: a HW session that emits no first
segment respawns on libx264 and reports hw=False (the route/stats overlay honestly
show CPU). `wait_for` gained an optional `proc` so a dead ffmpeg fails fast instead
of burning the 25s budget before the fallback fires.
Tests: TestProbeVideoHwsafe (parsing + probe-failure-assumes-safe), the 10-bit auto
gate + "on" skip in TestWantHw, and the no-segment HW→SW respawn in
TestTranscodeStartSession. Backend lane green.
A downloaded video was silently demoted to a download-only "file" (no
in-app play/edit) whenever yt-dlp's info dict omitted vcodec/acodec — which
it does for Facebook and other sources. Finalize derived media_kind from
those nulls (`derive(None, None)` -> file), so a genuine H.264/AAC MP4
became non-playable in the library.
Fix: probe the finished file on disk (the ground truth) at finalize and
derive from that, falling back to the info dict only for a field the probe
couldn't read. This is the same ffprobe the upload ingest already used, now
extracted to a shared downloads/probe.py so the download worker and the
upload path share one classifier (and can't drift). Also backfills the
stored vcodec/acodec/width/height from the real file.
Tests: TestResolveMediaFacts pins probe-wins-over-info (incl. the Facebook
no-codec case and yt-dlp's literal "none"); upload's probe tests repoint to
the shared module.
The runtime image ships ffmpeg with h264_vaapi/libva2 but no VA driver, so
h264_vaapi can't initialise and a Plex transcode silently falls back to
libx264. Add the iHD driver (intel-media-va-driver) so the UHD 630 iGPU can
hardware-encode once /dev/dri is passed into LXC 118 (host + compose side,
tracked in siftlode-ops). Harmless where no render node is present.
Eight verified findings from the sprint deep-review:
- Transcode cap: _enforce_cap now counts only transcode sessions, so a
live remux (stream-copy) stream can no longer be LRU-evicted mid-play —
matching the config comment + the HU/EN Config hint that promise remux
is uncapped.
- Player Back: the browser/mouse Back interceptor (BackClose) now also
mounts for the stats overlay and up-next card, so Back closes them first
instead of ejecting the whole player (keyboard/Esc already did).
- Honest cold-start: loadSession clears sessionIsTranscode up front, so a
transcode->direct/remux switch no longer flashes a stale "Preparing
stream..." during the session request.
- Stats overlay a11y: the close (X) buttons in the stats, help and info
overlays now read as "Close"/"Bezaras" (new plex.player.close key), not
"Back"; dropped aria-live from the per-second stat grid so a screen
reader is not flooded with telemetry.
Tests: route-level transcode routing (transcode item -> HLS re-encode
session, remux stays copy, direct opens none); start_session threading the
preset/crf/max_height knobs + hw/preexec into the ffmpeg argv; UpNextCard
countdown auto-advance, Play-now, Cancel and the S?-E? heading fallback.
Also brings UpNextCard.tsx / plexStats.ts / plexStats.test.ts to prettier.
Surface the transcode session's runtime facts in the player. The session
response's transcode/hw flags now thread through: the stats overlay's mode row
reads "transcode · GPU" (VAAPI) or "transcode · CPU" (libx264) — the at-a-glance
confirmation of which S1 path engaged — and the initial-load overlay says
"Preparing stream…" instead of "Loading…" for a transcode session, since its
first segment is genuinely slower than a remux and shouldn't read as a hang.
fmtMode (pure, unit-tested) appends the encoder only for a transcode with a known
encoder. i18n HU/EN for the new preparing label. Browser-UAT'd on the XviD
fixture: mode row reads "transcode · CPU" live (software, no render node here).
The software-fallback re-encode now runs deprioritized and admin-configurable.
The SW transcode ffmpeg child is niced (preexec_fn → os.nice, applied per-child
because the Popen lives in the long-lived API process, which must NOT itself be
niced — unlike the download worker's whole-process _deprioritize) so a CPU-bound
re-encode can't starve request handling or playback; the VAAPI path needs none of
it.
New sysconfig knobs (plex group, rendered on the admin Configuration page, i18n
HU/EN): plex_transcode_hw (auto/on/off, layered onto _want_hw), plex_transcode_
preset, plex_transcode_crf, plex_transcode_max_height (software-only downscale-to
cap; the GPU path encodes at source resolution). plex_max_transcodes stays the
concurrency cap (comment corrected — the fallback is shipped, not "later").
pytest extends the command-builder + _want_hw coverage (preset/crf/max_height
plumbing, the on/off/auto policy). Browser-UAT'd: max_height=240 drops the live
resolution to 330x240; the SW ffmpeg child runs at nice 10 (ppid=api process).
Non-h264 items (playable="transcode": HEVC/VP9/AV1/MPEG-2/XviD…) now play by
re-encoding the video to H.264 inside the existing HLS session, instead of the
old HTTP 501. VAAPI hardware encode (h264_vaapi, full GPU decode→scale→encode
pipeline) where the render node is present and the source is HW-decodable;
libx264 software fallback otherwise (yuv420p 8-bit, -threads reserve-one-core).
The re-encode mints a keyframe at every segment boundary (-force_key_frames) so
the HLS muxer still cuts independent segments and seeking works; everything else
— -copyts, the HLS tail, multi-audio renditions, the AAC audio path — is the
same machinery as remux, so hls.js/subtitles/seeking are unchanged. The session
route returns transcode/hw so the player can surface the active mode.
pytest pins both command branches (software + VAAPI shape) and the HW-selection
gate (render node present AND source HW-decodable). Browser-UAT'd on the XviD
fixture (Winning London): 501→plays, real 528×384 H.264 frames, 0 dropped, seek
lands clean; stats overlay Mode row reads "transcode".
At episode end, when a next item exists and the pref is on, show an up-next
card (poster + title + ~10s countdown + Cancel) instead of the old instant jump,
so binge stays in the viewer's control (D6-A). Countdown or Play now advances;
Cancel/✕ dismisses and stays on the finished frame. Lives only on the
play-to-the-end path — credits-auto-skip advances earlier and never reaches the
card, so the two reconcile by construction (no double-advance). New pref
'upNext' (default on) with a Playback-tab toggle; the card closes on item change
and joins the Back/Escape cascade. i18n HU/EN.
Add a toggleable stats overlay to the Plex player: active mode
(direct/remux/transcode), transport, resolution, codec, bitrate, HLS level,
dropped frames, buffer-ahead, session offset and position — sampled once a
second off the live videoRef + hlsRef (no data layer). Non-modal corner panel,
aria-live polite, dismissable; toggled with 'd', a gauge control-bar button, or
its X. Number-crunching lives in a pure, unit-tested plexStats module. Doubles
as the S1 transcode-verification surface. i18n HU/EN.
Add discoverable rewind-10 / forward-10 controls to the Plex player control
bar, flanking play/pause (D5-A). New Skip10 glyph: an outline circular arrow
with a centred '10', deliberately distinct from the episode-level
SkipBack/SkipForward and from Restart's plain RotateCcw. Reuses seekTo; mirrors
the keyboard ←/→ (seekStep=10). i18n HU/EN aria-labels.
Bundles the whole E7 epic (library metadata, crop fix, share-by-default, in-app player,
browser-playable guarantee, local upload) plus the deep-review hardening. Bump VERSION and
add the 0.76.0 release-notes entry (RELEASE_NOTES[0] must match VERSION).
Deep-review remediation on the frontend, all findings adversarially verified:
- LibraryPlayer picks audio vs video from the canonical media_kind (single source), not a
hardcoded container whitelist, so an uploaded audio file with an uncommon/absent container
renders in <audio> instead of a broken video box (legacy null media_kind keeps the heuristic).
- UploadDialog aborts the in-flight upload when the dialog is closed by X/ESC/backdrop/Back
(not only the footer Cancel); drag highlight uses an enter/leave depth counter to stop the
flicker; the progress bar gets a stable role=progressbar aria-label with the value on aria-valuenow.
- DownloadCenter's Shared tab renders honest loading/error states instead of a blank panel, and
the library/shared row-action gating moves to a single tested helper (lib/downloadActions).
Tests: downloadActions gating matrix, the uploadReq XHR path (abort/401/422-localize/onerror),
and the media_kind-driven audio/video branch.
i18n: downloads.upload.uploadProgress (HU + EN).
Deep-review remediation for the E7 upload path, all findings adversarially verified:
- Serve every library file with a Content-Type chosen from the ffprobe-verified media_kind
+ a strict container allow-list (storage.served_media_type), never guessed from the
user-controlled file extension. Closes a stored-XSS vector where a media/HTML polyglot
uploaded as "evil.html" was served inline as text/html on the login-free /watch surface.
Applied to both the authenticated /file and the public watch_file endpoints.
- Classify uploaded still images (jpg/png/gif/webp/…) as media_kind='file' so they are
force-downloaded and don't get a broken in-app video player.
- Roll back the on-disk side of an upload when the ingest transaction fails after place_file
(unlink the placed file + its deterministic poster path), so a failed commit can't orphan
bytes in the GC-skipped .uploads tree.
- Floor download_upload_max_bytes at min=1 so a stored 0 can't silently disable the per-file cap.
- Dedupe the ffprobe-JSON invocation into edit.run_ffprobe_json (shared by probe_codecs and
upload._probe) and the upload extension into storage._clean_upload_ext; drop the now-unused
parse_probe_streams.
Tests: public + authenticated force-download and the polyglot-not-served-as-HTML guard, the
real _probe classifier (image/cover-art/dims/duration), the ingest rollback/cleanup path, the
max_jobs branch, the cap-floor invariant, and run_ffprobe_json error handling.
The /watch/{token} SPA gets a third branch: media_kind==='file' renders an
info card (name / TYPE · size) + a Download button, no player. The <video>/
<audio> branches now guard on media_kind!=='file' so legacy links
(media_kind null) still play. Download is gated on the link's allow_download,
mirroring the media branch; the backend serves a file force-download
(attachment + octet-stream) regardless, so the gate only reflects owner ACL.
FE-only (public_meta already emits media_kind/size_bytes/container since S5a).
i18n HU/EN/DE 'file' fallback label. Two DOM tests: file -> info card +
Download, no player; view-only file -> no Download.
UploadDialog (drag-drop + native picker + optional display name) opened
from a new Upload button in the queue add-row. Uploads stream through a
new XHR helper (uploadReq in api/core) so the dialog shows real 0-100%
progress with a cancel — fetch/req can't report upload progress. The
upload lands as an already-done job; the S5b file-kind row gates it to
download+share. i18n HU/EN; upload cap/empty errors localize via the
shared structured-detail path.
Surface the S5a media_kind discriminator in the library UI. A generic
uploaded file (media_kind='file') is download+share only — no player and
no timeline to trim, so Play/Edit/Edit-details are media-only; it shows a
neutral file glyph instead of an (always-empty) thumbnail and no duration
chip (container/size still read). The "Shared with me" tab's file row is
gated the same way. Re-download is now hidden for edit clips and uploads
too (neither has a re-fetchable source — the backend already rejects both
with 409), removing a latent click-to-409 on edit rows.
FE-only: the serializer already emits media_kind (S5a). Adds media_kind to
the DownloadAsset type and "upload" to the job_kind union; DOM tests cover
the file-row presentation (glyph, no img, no duration).
Add the non-yt-dlp ingest path so a user-uploaded file joins the same download
library and inherits its function set. Any file type is accepted: media
(video/audio) gets the full set (metadata, share, play/edit), a generic file
(pdf/zip/docx/…) is download-only.
- MediaAsset.media_kind ("video"|"audio"|"file") — the stored discriminator that
gates library actions. Set at every finalize (download probe, editor carries the
source's kind, upload probe); consolidates the ad-hoc audio-detect that lived only
in links.py into one invariant (downloads.mediakind.derive). Migration 0076 adds
the column + backfills existing rows.
- downloads/upload.py: ingest_upload probes the file (ffprobe → codecs/dims/duration),
places it in a per-user .uploads tree, and creates an already-ready asset + done job
(the same cache-hit shortcut enqueue uses). Uploads never expire (irreplaceable).
- POST /api/downloads/upload: streaming multipart with the per-file cap
(download_upload_max_bytes, default 500 MiB) enforced on actual bytes read; quota
charges the known size up front (quota.check_upload).
- Security: a generic file is always served force-download (attachment +
application/octet-stream) on both the in-app and public endpoints, so uploaded
HTML/SVG can't execute inline. Edit + redownload reject non-media / upload sources.
- python-multipart added (first multipart endpoint in the app).
Play a completed library item in-app: a Play button on Library rows (and
Shared rows with download access) opens a modal that streams the local file
into a native <video controls> (or <audio> for audio-only assets).
Rather than the YouTube IFrame PlayerModal or the Plex HLS PlexPlayer — both
bound to their own domain APIs and unable to point at a local file — this
reuses the shared Modal a11y shell (focus-trap, ESC, layer-stack, portal) and
the range-aware /api/downloads/{id}/file endpoint. S4a's universal-codec
guarantee (mp4/H.264/AAC + m4a/mp3) makes native playback always work, so seek,
volume, fullscreen and speed come for free with zero transcode.
D2-A: the library row's Share button becomes a single action — quickShareLink()
ensures a public link (minting on demand), copies it to the clipboard, and toasts
with an "Open in new tab" action. A copy failure still toasts (warning) with that
action so the link is never a dead end. Advanced controls (password/expiry/revoke/
user-ACL) stay in the existing ShareDialog, reached via a new "Manage sharing" row
button.
D1 (forward-only): CreateLinkIn.allow_download defaults to true, so a newly minted
link is downloadable by default. The default lives in the API, not a migration —
the download_links column default stays false, so no existing link flips. The
ShareDialog create-default is flipped to match.
Tests: TestCreateLinkDefault (default true; explicit false honored); 4 vitest cases
for quickShareLink (mint-vs-reuse, copy ok/fail, create failure). HU/EN parity.
The Download module's purpose is download -> share -> play in-browser, so the
output must play in EVERY browser (iOS/Safari/WebKit included). The only
universally-safe combo is mp4 + H.264 + AAC/MP3.
- formats.normalize() now CLAMPS every spec to that profile (container->mp4,
vcodec->None, audio_format opus->m4a) at the single point all paths flow
through (picker, stored profile, raw API) — not just by hiding UI options. A
source exposing no H.264 is still caught by the worker's browser-safe
re-encode, so playability is guaranteed end-to-end.
- build_ydl_opts drops the now-unreachable non-compat branches (+ _VCODEC_SORT).
- _SIG_VERSION 3->4 so assets cached under an old non-compat spec — or a stale
non-H.264 mp4 that slipped the v3 net (the HEVC Facebook dls) — re-derive.
- ProfileEditor drops the container/codec pickers and Opus; audio is M4A/MP3.
- i18n: remove the now-unused container/vcodec/any keys (HU+EN parity).
The video preview is object-fit: contain (the browser default for <video>), so a
non-16:9 source is letter/pillarboxed inside the element box. The crop marquee was
drawn in fractions of the whole box (bars included) and those fractions were then
multiplied by the source resolution, so the emitted ffmpeg crop diverged from what
the selector showed. Anchor the overlay to the computed content rect (and set
object-contain explicitly) so a marquee fraction is a fraction of the real picture;
extract the display-px<->source-px math into cropGeometry.ts with unit tests, and
clamp the even-rounded window in-bounds so a full-frame crop can't overflow.
Enlarge every non-title text on the card (channel, status/format/size/date meta,
source-ref line, progress readout) one step (xs→sm) plus their inline icons, and
grow the row action buttons (padding + icon) via the actions wrapper so the shared
IconBtn stays smaller in the modals. Buttons keep the title's line — the wrapper is
shrink-0/no-wrap, so the text column shrinks instead.
The completed download rows already surfaced size + duration; add the concrete
container (MP4/M4A/WebM…) as a compact chip so the library reads as a media list
with a visible format — the audio-vs-video distinction the running-only phase pill
can't show at rest. Pure display of the already-serialized asset.container; locked
by a small DOM test (present when ready, absent before the worker fills it).
- Button: `loading` always disables (|| not ??) — stops a double-submit
when a call-site passes an explicit boolean `disabled` (VideoEditor).
- playlists: track un-ingestable-but-live YouTube ids in the sync baseline
so a linked playlist containing a private/deleted video converges instead
of re-classifying it as a pending pull forever; re-attempt ingestion each
sync so a restored (private->public) video heals, and prune ids that
leave YouTube.
- SettingsPanel: download-auth section renders an honest error/loading
state (StateMessage + retry) instead of a bare empty section on a failed
credentials fetch; HU+EN loadError string.
- tests: reorder-order, partial-failure baseline hold, un-ingestable
converge/heal/prune, Button loading-disables, download-auth error/retry.
The confirm dialog spelled out both sides even when one was "+0 / −0", which read
as engineer shorthand. Build the message from one sentence per side that actually
changes and add a short "stays unchanged" line for the untouched side; the zero
side is no longer shown as a bare +0/−0 to decode. Assembled in the component
from granular i18n clauses (add/remove per side, reorder, rename) with count
plurals; HU+EN. Replaces the single pushPlanMerge template.
"Sync to YouTube" was a one-directional destructive push (local wins, deletes
from YouTube every item not in the local list), so items added on YouTube were
lost and a dirty pull was skipped entirely. Replace it with a real 3-way merge:
each item is classified against the last-synced baseline as a local-add, a
YouTube-add, or a genuine delete, so an add or delete on either side survives.
- Persist the ordered baseline id set (new playlists.synced_video_ids, migration
0075); the fingerprint hash alone couldn't drive a merge. NULL baseline (fresh
export / pre-S7 link) unions losslessly on the first sync and records one.
- Pure merge_plan(baseline, local, youtube) -> add/remove per side + merged order
(local order, YouTube-only additions appended). merge_playlist applies the
local side directly and the YouTube side through the failure breaker; the
baseline only advances on full success so a partial failure re-converges.
- plan_merge/push-plan now report what each side gains and loses; the confirm
dialog shows the two-way plan before applying (pushPlanMerge, HU+EN).
- Tests: 10 new (pure classification incl. delete-vs-stale-copy; DB apply proving
a YouTube-add and a Siftlode-add both survive on both sides, a genuine delete
propagates without collateral loss, no-baseline never deletes, create path).
Each user stores their own login cookies (Netscape cookies.txt) for an
auth-walled download host (Facebook, Instagram, X, TikTok, Reddit) in
Settings; a download of an auth-walled link on that host is retried with
the acting user's cookie.
Two load-bearing security controls, both in downloads.credentials as the
single source of truth so enqueue and the worker can't drift:
- cache privacy: a cookie-authed download salts its MediaAsset format_sig
with the user id, so the authed asset is private and never cache-served
to another user. The worker attaches a cookie ONLY when the asset it is
downloading into IS that private, salted identity.
- host scope (SEC-12): a cookie is resolved only for a URL whose netloc
the credential owns (netloc-scoped _host_is); a look-alike/unrelated
host gets none.
cookies_enc is Fernet-encrypted at rest, only decrypted in-worker into a
0600 file under staging/.auth/ (survives the retry wipe + _produced_file
scan) and unlinked in finally. The blob is never returned by a route,
logged, audited, or written to a job's error/snapshot. cookiefile is set
after the adapter's extra merge so an adapter can't clobber it. Settings
UI is write-only (host + set/updated only, never echoed). New
download_credentials table + migration 0074; per-user routes; HU+EN i18n.
Tests: host-scope, cache-privacy (no cross-user serve), encrypt-at-rest,
write-only API, worker attach-gate; FE dom test for the write-only field.
Sweep the rounded-lg solid/ghost/outline action-button family onto the shared primitive:
ConfirmProvider, ErrorDialog, DownloadDialog, DownloadCenter, downloadModals, downloadAdmin,
ProfileEditor, PersonalViewsModal, SettingsPanel, WatchPage, DraftSaveBar. Deliberately left
on their own styles per the agreed scope: login/onboarding rounded-xl CTAs (Welcome/Onboarding/
Setup/KeyGate), glass Plex surfaces, segmented pills/toggles/switches/chips, dropdown triggers,
data-driven Banner/tone maps, text-xs dense buttons, and tiny inline p-1/p-1.5 icon controls —
none map 1:1 to a variant+size without a visual change, and the repo has no tailwind-merge.
Introduce frontend/src/components/ui/Button.tsx — the one action-button primitive
(variants primary|danger|outline|ghost|glass|danger-outline; sizes xs|sm|md|lg|icon;
icon/iconOnly/label/loading/fullWidth/forwardRef). No focus-visible (already centralized
in index.css @layer base). Migrate the cleanest proof sites off btnCls, and flip the
channel Subscribe button to the outline variant so it matches Full history (the user's ask).
The download/edit child (yt-dlp + ffmpeg) shares one LAN box with the API,
Postgres, and Plex playback. A CPU re-encode pegged every core for ~30s and
starved web requests + playback until it finished. Full-scope S4 mitigations:
- Child self-de-prioritizes at startup (inherited by every ffmpeg/yt-dlp
descendant): CPU nice increment + best-effort idle ionice class + an
OMP_NUM_THREADS budget, all config-gated and independently disable-able.
- Cap the browser-safe re-encode's encoder threads (`-threads`) so a transcode
reserves a core for foreground work instead of claiming all of them.
- Throttle the retention GC's whole-tree orphan sweep (yield IO after each
batch of files) so its rglob can't monopolize disk IO in the API process.
- Idle-back-off the Download Center (2s→15s when nothing queued/running) and
UsageBar (2s→15s when running_jobs is 0) polls; both snap back to 2s on the
next fetch after an enqueue (invalidateDownloads refetches immediately).
Tests: encode_thread_cap (pin/reserve-core/edge), -threads flag presence,
_deprioritize (nice/ionice/OMP branches), GC sweep throttle batching.
5a — the public watch page rendered every asset in a <video>, but WebKit (all
iOS browsers) refuses to play an audio-only mp3 in <video>, so shared audio
links were broken on iPad while working on desktop Chromium. public_meta now
flags audio-only assets (codec present, no video stream) and WatchPage renders
a native <audio> in a padded surface card (no artwork exists for these).
5c — a login-walled Facebook post failed as a bare 'unknown', which offered a
misleading Retry. Classify closed-group / cookie-suggestion auth walls as
login_required and genuinely unsupported sites as a new unsupported_host class
(both non-retryable), and drop unknown from the modal's retryable set — an
unclassified failure is most often an unparsed auth wall. The queue row keeps
its own force-retry for real transients.
The asc/desc buttons in the sort popover footer share one component across
Feed and Plex browse, but rendered differently: the Plex popover is narrower
(short option labels), so "Descending" wrapped icon-over-text and made the
active button taller. Add whitespace-nowrap to the direction buttons and bump
the popover min-width (min-w-52 -> min-w-56) so both call-sites render an
identical single-line toggle.
The incremental watch-sync (run_plex_watch_sync) learned a movie's watched
transition only from the history feed + onDeck. When a movie is finished on
Plex (commonly by scrubbing through the end credits) Plex sets viewCount>0,
clears viewOffset and DROPS it from Continue-Watching, so onDeck no longer
lists it (and onDeck can only ever ADD an in-progress row, never resolve one),
while a scrub-to-end frequently emits no history session row. The stale local
status='new', position>0 row then survived until the DAILY full reconcile —
which is why movies kept showing "in progress".
Add _reconcile_inprogress_movies: for each local in-progress MOVIE that Plex's
onDeck no longer lists, read its current per-account viewCount/viewOffset with
one metadata() call and apply it via the shared _pull_apply, flipping to
watched when Plex says so. Bounded by a probe cap (100), most-recently-touched
first; episodes are left to onDeck/history. No-signal rows are preserved (an
un-watch stays the daily reconcile's job).
Tests: watched-flip, onDeck+episode skip, and no-signal-preserved.
Deep-review of the quickfix batch surfaced two data/preference-loss bugs plus
smaller items; all fixed with tests.
- watch_sync _pull_apply: don't let the Plex-authoritative pull overwrite a DIRTY
local row (a change whose immediate push failed) — that stranded the value
forever since _repush_dirty only retries dirty rows. Leave it dirty for re-push.
- PlexProvider / ChannelsProvider: a partial shared link opened in a fresh tab
persisted mount-time DEFAULTS over the account's stored scope/sort/filters
(base read before the account was pinned). Persist/keep only URL-present dims;
re-hydrate the omitted ones from storage.
- playback resume write-back: guard against out-of-order delivery (a superseded
older push now drops) and evict the throttle map so it can't grow unbounded.
- PlexPlayer: announce mid-playback buffering to assistive tech (role=status +
sr-only label); new plex.player.buffering (HU+EN).
- columnSort: hoist the shared key:dir sort codec used by both URL-state modules.
- Tests: dirty-guard + flag-settle + per-key throttle scoping + superseded-push
(backend); hold-repeat/suppress-click/unmount + partial-link no-clobber +
refetch-doesn't-clobber-undo (frontend). Backend pytest 475, FE vitest 519.
The Channels-manager content state now round-trips through the address bar,
so a manager view is bookmarkable/shareable — the S4 pattern applied to the
last content page the audit flagged.
- New lib/channelsUrlState.ts (channelsParamUpdates / channelsParamsToState /
hasChannelsParams) under NAMESPACED keys ctab/csort/cf — channels-unique
like ?v=/?pl/pscope, so no other provider reads or clears them and the
feed's URL-stripping can't delete them. The mixed scalar/array FilterMap
(sync/priority scalars + tags multi) rides in `cf` as a JSON blob so both
shapes round-trip exactly. Only non-default values emit.
- ChannelsProvider mirrors {view, sort, filters} via useUrlMirror, page-gated
on channels (off-page the keys clear; localStorage still holds the state and
it re-mirrors on return). A shared link wins over stored state: readChannels
UrlSeed captured once, applied before paint through the slice setters (so the
account-pin re-hydrate sees them dirty and won't reload storage over the
shared view), then persisted to the account once pinned so it survives a
later plain reload — mirrors PlexProvider's seed/rehydrate. The name search
stays ephemeral (out of the shared contract).
- NavigationProvider's page-switch nulls ctab/csort/cf alongside the plex keys
so switching modules resets to the manager root.
Tests: channelsUrlState.dom.test.ts (9 round-trip) + ChannelsProvider.dom
seed/mirror (2); the existing tab-history test's beforeEach now resets the
query string too (the mirror writes it). FE vitest 503→514. FE-only.
The Personal-views manager's detail pane becomes editable instead of
read-only:
- Captured filters render as REMOVABLE chips. Removing one prunes the set
and writes it straight back to the stored view (PATCH filters), via the
same live-row builders (useActiveFilters / buildPlexActiveFilters) that
already compute the pruned snapshot — so the modal and the live chip row
can't drift. The prune is wrapped in useUndoable + the shared UndoToolbar,
so undo/redo re-persist the same way. The undoable draft is the single
source of truth for the chip row, so a chip-prune refetch never clobbers
the history.
- A "Save current" button beside Apply stores the module's currently-applied
filters INTO the view (the live→stored inverse of Apply). Disabled when the
view already equals the live filters (it's the active one). On save the
draft re-seeds to the saved snapshot and clears the stale undo history.
- Rename gains a visible commit affordance: a check button beside the name
input that enables once the name changes (Enter and blur still commit).
Provider gains two methods mirroring `rename`: updateFilters(id, filters)
and saveCurrent(id). One shared provider serves feed + plex, so both get it.
PATCH filters was already supported end-to-end — FE-only.
New i18n: views.saveCurrent / saveCurrentHint / saveCurrentUpToDate (HU+EN).
Tests: 5 new in PersonalViewsModal.dom.test.tsx (chip-remove persists, undo
re-persists, save-current fires + disables when up-to-date, rename commit).
Item 6 — the tag add-trigger now LEADS the chip row (a stable left anchor)
instead of trailing it, so on the detail page (bounded=false) adding chips
grows the row to its right and the '+'/its editor popover no longer drift.
Compact icon in the width-bounded manager cell; a labelled '＋ Tag' pill
where there's free width (the detail header).
Item 7 — surface the per-subscription 'hidden' flag on the detail GET
(channel_detail was omitting it) and add an Eye/EyeOff hide/unhide toggle
next to Block on the channel page, mirroring the manager. FE ChannelDetail
gains 'hidden'; new channel.* i18n keys (HU+EN).
Tests: +3 backend (channel_detail surfaces hidden, both states + unsubscribed
default). Gate green: backend pytest 471, FE vitest 498.
Redesign the shared PriorityStepper (channel manager cell + detail header)
from a value-plus-stacked-arrows control into a horizontal [−] value [＋]
segmented stepper. The value now sits centred between the buttons and opens
an inline editor in a FIXED-width slot, so click-to-type no longer "pops"
the control wider (the old absolutely-positioned overlay grew w-6 → w-14).
One `size` prop drives the two surfaces: `sm` draws its own bordered pill
for the standalone table cell; `md` drops the outer border and keeps only
the segment dividers, blending into the detail header's lozenge instead of
double-bordering it. Hold-to-repeat, negatives, and the debounced-flush
persistence hook are unchanged.
The manager priority column widens 3.5rem → 5.5rem to fit the horizontal
control under fixed table layout.
Tests: 7 new DOM tests for the stepper interaction contract.
Mirror the Plex-browse content state into the address bar so a browse view is
bookmarkable/shareable, the Plex analogue of the feed's urlState. Keys are
NAMESPACED (pscope/psort/pshow/pf) rather than reusing the feed's bare
scope/sort/show: FeedFiltersProvider actively strips its own KEYS from the URL
whenever off the feed page, so a shared key would be deleted out from under the
Plex page. The namespaced keys are Plex-unique (like ?v=/?pl), so no other
provider ever reads or clears them.
- New lib/plexUrlState.ts: plexParamUpdates / plexParamsToState / hasPlexParams.
The pf filter blob reuses the SAME appendPlexFilters wire serializer (new
public plexFiltersToParams + inverse parsePlexFilters, kept next to each other
so a new wire key can't be added on one side only).
- PlexProvider: URL-seed wins over localStorage at mount; the account-pin
rehydrate persists the seed instead of clobbering it (mirrors feed's
initialHadUrlFilters); useUrlMirror mirrors/clears the 4 keys, gated on
page===plex. q/field stay out of the shareable contract.
- NavigationProvider: a page switch now also nulls the 4 plex keys.
Tests: 8 new round-trip cases in plexUrlState.dom.test.ts (FE vitest 483→491).
Add a 'lastwatched' sort key to the unified Plex browse. Movies rank by
coalesce(progress_updated_at, watched_at); shows by max(coalesce(...)) across
their episodes (rollup.resumed_at, now broadened from progress-only so watched
episodes count too). Never-watched titles sink via nullslast.
Frontend auto-applies lastwatched:desc when entering the in-progress watch-state
view and restores the pre-entry sort on exit; a manual sort change while there
still wins. i18n HU+EN. Backend tests cover both union legs + mixed nullslast.
The incremental/reconcile job docstrings still described last-write-wins and a
30-min cadence; update them to match the S2 behavior (Plex wins on divergence,
15-min incremental) so the "why" doesn't drift from the code.
Make Plex the source of truth for watch state:
- Write-back during playback: item_progress now pushes the resume position to
Plex on the periodic checkpoint too (not only the final flush), throttled to
one push per item every ~10s (in-memory, single-process rate limiter). The FE
now also fires an immediate (debounced) push on seek.
- Faster incremental pull: 30 → 15 min (plex_watch_sync_interval_min).
- Plex-authoritative pull: _pull_apply resolves a genuine divergence to Plex's
state instead of last-write-wins; the _same_state + synced_to_plex short-circuit
still prevents a freshly-pushed row from bouncing. Removed the now-unused
_LWW_TOLERANCE_S / _sift_ts.
Tests: 5 new in test_plex_watch_sync.py (Plex-wins resume/watched, no-bounce,
throttle final vs periodic).
The Plex player stalled ~2s a few seconds into every auto-advanced next
episode. Root cause: each auto-advance spins up a cold ffmpeg HLS remux
session, and for a fresh start (start_s==0) start_session returned
immediately with zero buffer — hls.js drained the first segment, then
rebuffered waiting for the still-warming ffmpeg to write the next one.
Once ffmpeg gets ahead (stream-copy is faster than realtime) it never
stalls again.
- stream.py: before reporting a session ready, wait for the first
_WARMUP_SEGMENTS (3) video segments to exist — the seg0 wait is now
unconditional (was start_s>0 only) and warm-up runs for all starts.
Best-effort and bounded: stop at the first segment not ready in time.
- PlexPlayer.tsx: a loading/buffering spinner. The existing overlay only
covered the INITIAL load (!ready); add a `buffering` state driven by the
video's waiting/stalled/seeking (set) and playing/canplay/seeked/pause
(clear) events so a mid-playback stall or in-flight seek reads as
"loading" instead of a frozen frame, and surface a fatal loadError even
once playback has started. Spinner uses the shared Loader2.
Merges roadmap E6·item1 (spinner while loading/seeking) into this fix,
since the server-side warm-up deliberately holds ready a beat longer.
Tests: 3 new in test_plex_stream.py (warm-up waits for the first few
segments; stops at the first missing one; no warm-up when seg0 never
arrives). Gate: backend pytest 460 (Docker lane), FE tsc/lint/knip/
prettier + vitest 483.
Fixes from several multi-agent deep-review passes over the E8 feed-filtering &
channel-manager epic (S1-S4):
- feed_years buckets by UTC year to match the UTC-pinned year-filter bounds
- tag suggestions: examples ∩ subscribed (drop tagged-then-unsubscribed channels
from the profile denominator); exclude hidden channels as suggestion targets
- channel manager: restore ghost chips + surface an error toast on a failed tag accept
- year filter: debounce the search term so the per-year facet doesn't refetch per keystroke
- channel tags: aria-label the "+N" overflow pills
- extract useTagSuggestions hook; add backend + hook tests (profile boundaries, cap,
language exclusion, unsubscribed/hidden handling, UTC bucketing, bulk-accept)
Bump VERSION to 0.73.0 + release notes.
With 2+ suggestions the narrow tags cell clipped the second ghost chip
mid-word right next to the edit "+", reading as the icon covering it. Route
the ghost chips through the same fit machinery the attached chips use: a
dedicated SuggestedChipsLane fits what the cell holds and collapses the rest
into a "+N" pill whose hover popover still one-tap accepts / dismisses each.
The lane is attached-XOR-ghost (suggestions are untagged-only, and accepting
one now drops the whole channel from the suggestion cache), so each lane owns
the full cell width instead of clipping the other.
Learn, per user tag, which auto TOPIC tags are characteristic of the channels
you've tagged it, then suggest that tag for still-untagged subscribed channels
whose topics cover enough of the profile. Language auto-tags are excluded from
the signal — near-universal within a language, they flooded every channel.
New GET /api/tags/suggestions (read-only, deterministic) backed by
app/sync/tagsuggest.py. Surfaced in the Channel Manager as dashed "ghost" chips
in the tags cell — one tap accepts (reuses the attach-tag endpoint), × dismisses
for the session — plus a header badge and a bulk "Accept N confident" (the
full-profile matches) behind a confirm. No silent writes (D4 = suggest-and-confirm).
Also reflow a pre-existing prettier drift in dateFilter.ts from E8·S2.
Add a Year filter to the feed rail: quick chips for recent years plus a
'More…' popover listing all years with per-year video counts, sortable by
year or count. Selecting a year narrows the feed to that whole calendar
year (a published_after/before range applied in the api layer) and is
mutually exclusive with the Upload-date control.
Backend: new /api/feed/years endpoint + feed_years() — one grouped query
that honours every filter EXCEPT the publish-date narrowing (dropped), so
the year list stays a live drill-down and switching years never zeroes the
others. FE keys the list on the date-stripped filters, so picking a year
re-queries the feed but not the list.
Wires year through FeedFilters, the filterParams/URL (?year) round-trip,
the active-filter chip row, and the panel layout. i18n HU+EN.
Tests: feed_years count query (date narrowing ignored, other filters
honoured); dateFilter year-clearing; urlState year round-trip.
The channel manager's tag-filter row wrapped the trailing "…" catalog-actions
menu onto a second line once the chips + Clear outgrew the width. Rework it as
one non-wrapping row: the TAGS editor trigger (left), a single-line chip lane
that collapses overflow into a "+N" pill whose popover holds the rest (still
toggleable), then Clear and the "…" menu pinned right — so "…" always stays on
the first line.
New TagFilterChips reuses the shared measure core (useChipOverflowFit +
fitChipsWithPill), the same compression the feed's applied-filter row uses.
Filter to channels you haven't personally tagged in the channel manager
(no user-owned ChannelTag; auto language/topic tags don't count):
- Feed: a "No tag" sentinel in the "Your tags" sidebar combobox (exclusive
with real tag picks) + a removable "Untagged" chip; new `untagged` bool
feed param / `notag` URL key, persisted + coerced on every filter path.
- Channel manager: a virtual "No tag" chip in the tag-chip row filters the
table to untagged channels (client-side, shared NO_TAG_SENTINEL).
Backend `untagged` is a plain channel-level narrowing, so feed_summary keeps
it applied in the base pass — the count/facet lockstep holds with no mirror.
Note: item E (per-tag counts) and item D (Any/All toggle) were already
shipped; S1 delivers only item B.
UX-8 layerStack: add an integration test wired through the real useLayer
hook (popover document-listener + stamp) and a PlayerModal-shaped window
listener, driven by a real dispatched keydown. The popover close is wrapped
in flushSync so its layer is popped synchronously between the two listeners
-- the production mid-dispatch race -- making the escapeHandled stamp the
only thing that keeps the player from also closing. Mutation-checked:
removing the guard fails exactly this case.
SavedViews: cover feedCanSeedDefault's "yield to a bookmarked filter URL"
branch (a filter-bearing search string -> no seed) and the per-source
seededRef guard against the 60s refetch (a changed-list refetch re-runs the
seed effect; the guard blocks re-seed). The refetch test waits for the
changed list to reach the component so the effect has its chance to wrongly
re-fire. Both mutation-checked.
Frontend gate green: 464 vitest (+4). Backend untouched.
The S4 Play-all wrapper had no test — a regression inverting the empty-queue
guard or dropping the notice would re-introduce the silent no-op it was added
to fix, and stay green. Adds a PlexCollectionView DOM test (spied api +
notify) asserting: a leaf queues as itself, a show expands to its episodes in
season->episode order, and an empty expansion surfaces plex.collection.playEmpty
instead of no-op'ing.
Extract the show->ordered-episode-keys flatten into one pure, unit-tested
helper (lib/plexQueue.ts) and use it at all three sites — the collection
Play-all (S4) and the show/season play-through pages in plexViews — so the
season-then-episode queue-order invariant lives in one place instead of three
hand-rolled copies. Behaviour-identical (the helper's ?? [] is a safe superset
of the collection site's previously non-null read).
Also: a show-collection whose shows expand to zero episodes had an enabled
Play-all that silently no-op'd — the same 'does nothing' state S4 removed for
the empty-queue case. Surface an honest info notice (plex.collection.playEmpty,
HU+EN) instead.
The S2 seed effect ran on the saved-views query's first resolve, but that
query is ungated and — since SavedViewsProvider mounts above <App>, which pins
the tab-account only after /api/me — resolves before the account is known on a
fresh tab. It then evaluated canSeedDefault() against a null account (which
reports 'stored, do not seed') and burned its one-shot guard, so the starred
default was never applied until a reload: exactly the fresh-tab miss S2 set out
to fix. Gate the effect on the reactive account id so it defers instead of
consuming the guard, and re-fires when the account pins. Covers feed + plex.
Adds a dom test for the defer-then-seed-on-pin path the old test masked by
pre-pinning the account.
A collection's Play-all/Shuffle queue held only playable leaves
(movies/episodes), filtering out shows — so on a show-collection the queue
was empty and Play-all was hidden/dead. Build the queue by expanding each
show member into its episodes (season then episode order), concatenated in
member order; leaves still queue as themselves. Shows are fetched lazily on
click (parallel plexShow fetches), not on page load. Gate Play-all/Shuffle
and the poster on "has any playable member" (leaves OR shows), and disable
them while the queue builds. Scope: option A — no member manual-order
migration. Adds plex.collection.playFailed (HU/EN).
ActiveFilterChips (feed applied-filter row) and ChannelTagsControl both
hand-rolled the same single-line chip-fit measurer: a hidden mirror + a
layout-effect + ResizeObserver reading chip right edges, the real rem gap,
the pill width and the lane width. The policy half was already extracted
(decideChipLayout); the DOM-measurement half was still duplicated.
Promote that half to useChipOverflowFit(rowRef, chipsRef, pillRef, deps,
decide, initial): it owns the effect + observer + initial measure and reads
the common geometry, then hands it to each caller's own policy. The feed
row layers its leading label + trailing "Clear all" reservation on top and
keeps decideChipLayout; the tag cell's chips-only policy is extracted as
fitChipsWithPill (pure, unit-tested) alongside it. Add a jsdom test for the
hook (stubbed offsets, re-measure on deps). Behaviour unchanged — verified
in the browser: feed all/count modes + popover, tag "+N" fit + hover reveal.
The feed applied its starred default via a localStorage mirror
(LS.defaultViewFilters) written by SavedViewsProvider and read by
FeedFiltersProvider on load. That raced the login effect: on a genuinely
fresh browser (no LS.filters and no mirror yet) the feed could seed
DEFAULT_FILTERS and never re-apply the default until a reload. Plex had no
default-application at all.
Replace the mirror with a single path: SavedViewsProvider applies the
starred default via cfg.setFilters on the views query's FIRST resolve, but
only into a genuinely fresh module (no stored filters for the account, and
— feed only — no URL filter override). Applying persists it, so it happens
once and the last-view-wins path takes over, matching the documented
storage semantics. Because it runs off cfg.setFilters it delivers the Plex
port for free. Extract pickDefaultToSeed (pure, unit-tested) and cover the
first-resolve/stored/no-default cases for both modules in a provider test.
Removes the now-dead LS.defaultViewFilters key and its mirror read.
UX-8: one Escape must close only the topmost layer, never both an open
popover AND the player beneath it. The popover's Escape listener is on
`document` and fires before the player's on `window`; closing the popover
flushes its layer off the shared stack synchronously, so the player's
`anyLayerAbove()` lookup read "nothing above" and closed too. Add a
consumed-event flag to layerStack (`markEscapeHandled`/`escapeHandled`):
the acting topmost layer stamps the shared KeyboardEvent, and both players
check the stamp before the (now-mutated) stack. Immune to listener order
and mid-dispatch stack mutation. Cover with layerStack.dom.test.ts.
UX-7: the E4 `.reveal` sweep already covered the card action rows; two
residual hover-only traps remained — invisible-but-tappable/Tab-focusable
on touch. Add a group-agnostic `.reveal-hover` recipe (display:none under
`(hover: none)`) paired with each site's own hover/focus-within reveal:
- VideoCard play/Continue/Restart overlay: also reveal on
group-focus-within (keyboard), and drop it on touch — the card tap
already plays/resumes, so no permanent scrim over every mobile thumbnail.
- Carousel prev/next arrows: gone on touch, where the strip swipes.
The notifyCollectionEditError helper localizes the backend's duplicate-name
409 to plex.collection.nameTaken; it was applied to the New-collection panel
but two sibling collection-write sites still routed 409 through
notifyActionError, surfacing the server's raw English detail under the HU UI:
- PlexCollectionView.doRename (rename collision)
- PlexCollectionEditor.createNew (create-in-editor duplicate name)
Both now use notifyCollectionEditError, matching the create path. Also adds a
direct dom test for the extracted PlexLibraryPicker covering the enabled gate,
emptyHint, results, honest error, and no-results branches.
- CLAUDE.md: new "Collaboration" section (plan-first, options-with-marked-
optimal-and-why, mockups for design decisions, challenge unsound requests,
visual UAT before done, terse otherwise).
- CLAUDE.md: clarify release is user-owned in timing, agent-run in execution.
- CLAUDE.md + docs/development.md: document the ruff format --check gate step
(already enforced in .gitea/workflows/check.yml, was missing from the docs).
- CLAUDE.md: refresh the stale footer to point at the now-existing
docs/development.md and backend/app/README.md.
Backend: create-collection happy path (write-through + editable) and the
create resync-failure 422 (honest reconcile detail), mirroring the rename/remove
tests. Frontend: extract notifyCollectionEditError (the 409->nameTaken vs
generic-fallback mapping that was inline in the New-collection create()) and
unit-test it; wire create() through it.
Renders PageScroller and drives restoreScroll's rAF synchronously with fake
metrics: asserts a forward nav (new entry id) opens at top and Back restores
the offset, and that a new content key within one entry resets to top while
returning restores — the per-(entry,key) contract only the id primitives were
covering before.
AddItemPanel (Collection page) and NewCollectionPanel (browse) had near-
duplicate debounced library-search + result-list rendering. Extract it into
one PlexLibraryPicker that owns the query, the loading/error/empty states and
the row markup; callers keep their own chrome and pass term + renderAction.
No behaviour change.
Adds ruff's formatter to the gate. line-length 100 matches the frontend
prettier printWidth. The reformat itself lands as the next commit (kept
separate so it can go in .git-blame-ignore-revs).
2026-08-23 07:42:42 +02:00
448 changed files with 25253 additions and 3428 deletions
The local gate is **ruff + typecheck (3 tsc projects) + eslint + prettier --check + knip + vitest +
pytest**. It runs on every `publish`, which **refuses to build on failure — there is deliberately no
The local gate is **ruff (`check` + `format --check`) + typecheck (3 tsc projects) + eslint + prettier
--check + knip + vitest + pytest**. It runs on every `publish`, which **refuses to build on failure — there is deliberately no
`--skip` flag.** Run it and get it green **before** any merge, release, or handing work to review.
- Full gate (agents with the private ops dispatcher): `siftlode check`.
- Directly, without the dispatcher: `cd frontend && npm run typecheck && npm run lint && npm run knip && npm run test`, plus backend `ruff check backend` and `pytest` (the DB-lane needs Postgres).
- Directly, without the dispatcher: `cd frontend && npm run typecheck && npm run lint && npm run knip && npm run test`, plus backend `ruff check backend` + `ruff format --check backend` and `pytest` (the DB-lane needs Postgres).
- New DB-backed test? It must actually run, not silently skip — assume `SIFTLODE_TEST_REQUIRE_DB=1`.
## Workflow
@@ -26,12 +26,33 @@ pytest**. It runs on every `publish`, which **refuses to build on failure — th
keep commits logical and Conventional-Commit-styled.
- **No AI attribution in commits.** No `Co-Authored-By` trailer, no "generated by" lines. (This file
being AI-written is the intended, visible exception; commits are not.)
- **Release is a deliberate, user-owned step** (`siftlode release` from the feature branch: merge to
`main` → publish → deploy → verify `/api/version`). Do not self-ship; bring work to a green,
committed state and stop for the user's go-ahead.
- **Release: user-owned in timing, agent-run in execution.** The user decides *when* to ship; on their
go-ahead *you* run `siftlode release` from the feature branch (merge to `main` → publish → deploy →
verify `/api/version`). Never self-ship — bring work to a green, committed state and stop for the
go-ahead first, then run it yourself.
- **Public repo.** Keep ops/topology/secrets out — those live in a separate private repo. Nothing here
should assume or leak them.
## Collaboration — how to work with the human
The human is the product owner: they bring ideas and requirements. You are the technical lead — you own
how it gets built. Concretely:
- **Plan before you build.** For anything non-trivial, present a short plan (sprint-level for larger
work) and get a go-ahead before writing code.
- **Offer choices, mark the optimal — and explain the trade-off.** When several solutions are viable,
list them and mark the recommended one. This is the *one* place to spend extra words: give the *why*
behind each option and the weight of the decision. These decision points are where the product owner
engages with the build and learns from it, so make them understandable — a reasoned menu, not a bare one.
- **Mockups for design/UX decisions.** For any visual or interaction choice, show mockup options to
choose from before building.
- **Challenge unsound requests.** If a request is technically ill-advised and you can back it with real
arguments, push back or propose an alternative — don't comply blindly.
- **Verify UI in the browser before calling it done.** tsc/unit/DOM tests miss visual and interaction
bugs; do a real visual check of any UI change.
- **Be terse everywhere else.** Outside those decision points, lead with the answer or decision. During
implementation and debugging especially: no restating the same point reworded, no filler.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
peter